Schroeder Industries · BestFit Elements · inline line

39QZ1V filter element: specifications & equivalents

Q: What are the dimensions of the 39QZ1V filter element?

The published envelope is 152 mm OD × 983 mm length with a 104 mm inside diameter (5.984 × 38.701 in × 4.094 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does 39QZ1V use?

This element is rated 1 µm (nominal class) — 4.2 µm at β(c) ≥ 1000 (99.9% efficiency). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The 39QZ1V is a Schroeder Industries inline-line hydraulic filter element, built with excellement® z-media® (synthetic) media, sized 152 × 983 mm OD × length (ID 104 mm), rated at 1 µm class (4.2 µm at β(c) ≥ 1000 (99.9% efficiency)). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 152 × 983 mm

Inside diameter 104 mm

Filtration rating 1 µm nom.

Beta rating 4.2 µm at β(c) ≥ 1000 (99.9% efficiency)

Media Excellement® Z-Media® (Synthetic)

Collapse / burst 10.3 bar

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.

Dimensions, ratings and seal compound are taken from the Schroeder Industries online catalog. The nominal µm rating and the β200 absolute rating use different conventions — match the existing media grade before substituting; verify against the current Schroeder data sheet before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	Excellement® Z-Media® (Synthetic)
Filtration rating	1 µm
Rating basis	nominal
Beta ratio	4.2 µm at β(c) ≥ 1000 (99.9% efficiency)
Outside diameter OD	152 mm
Inside diameter ID	104 mm
Length	983 mm
End caps	open-ended cartridge element
Collapse / burst pressure	10.3 bar
Integral bypass valve	none (housing/valve-dependent)
Seal material	Fluorocarbon (Viton)
Operating temperature	-29 to 121 °C
Mass	6210 g
Source catalog	Schroeder Industries: Schroeder Industries online catalog (catalog.schroederindustries.com)
Last verified	2026-09-28

Sources: Schroeder Industries — Schroeder Industries online catalog (catalog.schroederindustries.com) — accessed 2026-09-28.

Schroeder Industries® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Schroeder Industries distributor.

Dimensions & series range

Outside diameter	152 mm (5.984 in)
Inside diameter	104 mm (4.094 in)
Overall length	983 mm (38.701 in)

All 152×983 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 05.8300.3VG.10.B.V.39	Eaton / Internormen	partial	Schroeder online cross-reference (INTERNORMEN); envelope match — verify grade and seals.
↔ 168300H3LL981XP page in verification queue	Aftermarket	partial	Schroeder online cross-reference (EPE); envelope match — verify grade and seals.
↔ 168300XH3SLS000P page in verification queue	Aftermarket	partial	Schroeder online cross-reference (EPE); envelope match — verify grade and seals.
↔ 168300XH3SLS000V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (EPE); envelope match — verify grade and seals.
↔ 2060637 page in verification queue	UFI	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ 2063569 page in verification queue	UFI	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ 231325 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HUSKY); envelope match — verify grade and seals.
↔ 2830L01B39 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 2830L01V39 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 3019163VG page in verification queue	Aftermarket	partial	Schroeder online cross-reference (INTERNORMEN); envelope match — verify grade and seals.
↔ 3830DGBB39 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 3830DGBV39 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 3830DGCB39 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 3830DGCV39 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 386014032C page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HILCO); envelope match — verify grade and seals.
↔ 386014033C page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HILCO); envelope match — verify grade and seals.
↔ 83393 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NATIONAL FILTER); envelope match — verify grade and seals.
↔ 8375248 page in verification queue	UFI	partial	Schroeder online cross-reference (MAHLE); envelope match — verify grade and seals.
↔ 8830DGDB39 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 8830DGDV39 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 891030SM3 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MAHLE); envelope match — verify grade and seals.
↔ 891030SMX3 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MAHLE); envelope match — verify grade and seals.
↔ 927945 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ 927945Q page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ 927947Q page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ 928085Q page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ 928086Q page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ 9314790 page in verification queue	UFI	partial	Schroeder online cross-reference (PUROLATOR); envelope match — verify grade and seals.
↔ 9314793 page in verification queue	UFI	partial	Schroeder online cross-reference (PUROLATOR); envelope match — verify grade and seals.
↔ C927945 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (COMMERCIAL); envelope match — verify grade and seals.
↔ C927947 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (COMMERCIAL); envelope match — verify grade and seals.
↔ C928085 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (COMMERCIAL); envelope match — verify grade and seals.
↔ C928086 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (COMMERCIAL); envelope match — verify grade and seals.
↔ DE0410B3U03 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (DENISON); envelope match — verify grade and seals.
↔ DE0410V3U03 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (DENISON); envelope match — verify grade and seals.
↔ DE0411B8C03 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (DENISON); envelope match — verify grade and seals.
↔ DE0411V8C03 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (DENISON); envelope match — verify grade and seals.
↔ E0411B8C03 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (WESTERN); envelope match — verify grade and seals.
↔ E0411V8C03 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (WESTERN); envelope match — verify grade and seals.
↔ FC1303Q003BS page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ FC1303Q003VS page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ FR434G03 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FRAM); envelope match — verify grade and seals.
↔ FR434G03V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FRAM); envelope match — verify grade and seals.
↔ H8011 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (BALDWIN); envelope match — verify grade and seals.
↔ H8012 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (BALDWIN); envelope match — verify grade and seals.
↔ H830039003BN page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ H830039003BN3 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ H830039003BN3V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ H830039003BNV page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ HC8300FCZ39H	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC8300FCZ39Z	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC8300FDZ39H page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC8300FDZ39Z page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC8300FKZ39H	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC8300FKZ39Z page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC8300FUZ39H page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC8300FUZ39Z page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC8300FXZ39H page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC8300FXZ39Z page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HF7008F	Fleetguard	partial	Schroeder online cross-reference (FLEETGUARD); envelope match — verify grade and seals.
↔ HP83L391MB page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HY-PRO); envelope match — verify grade and seals.
↔ HP83L391MV page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HY-PRO); envelope match — verify grade and seals.
↔ MF0062907 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MAIN FILTER INC); envelope match — verify grade and seals.
↔ MF0426049 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MAIN FILTER INC); envelope match — verify grade and seals.
↔ MP3215 page in verification queue	MP Filtri	partial	Schroeder online cross-reference (MP FILTRI); envelope match — verify grade and seals.
↔ MP5212 page in verification queue	MP Filtri	partial	Schroeder online cross-reference (MP FILTRI); envelope match — verify grade and seals.
↔ MP5314 page in verification queue	MP Filtri	partial	Schroeder online cross-reference (MP FILTRI); envelope match — verify grade and seals.
↔ P83250GFB page in verification queue	Donaldson	partial	Schroeder online cross-reference (PTI); envelope match — verify grade and seals.
↔ P83250GFV page in verification queue	Donaldson	partial	Schroeder online cross-reference (PTI); envelope match — verify grade and seals.
↔ PLC103M page in verification queue	Aftermarket	partial	Schroeder online cross-reference (TAISEI KOGYO); envelope match — verify grade and seals.
↔ SP-300-E-03-B	STAUFF	partial	Schroeder online cross-reference (STAUFF); envelope match — verify grade and seals.
↔ SP-300-E-03-V	STAUFF	partial	Schroeder online cross-reference (STAUFF); envelope match — verify grade and seals.
↔ TT8300391B page in verification queue	Aftermarket	partial	Schroeder online cross-reference (TODD TECHNOLOGIES INC); envelope match — verify grade and seals.
↔ TT8300391V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (TODD TECHNOLOGIES INC); envelope match — verify grade and seals.
↔ V3960010B1 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYCOA); envelope match — verify grade and seals.
↔ V3960010V1 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYCOA); envelope match — verify grade and seals.
↔ V3960030B1 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYCOA); envelope match — verify grade and seals.
↔ V3960030V1 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYCOA); envelope match — verify grade and seals.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

How the 39QZ1V model number is decoded

39QZ1VSchroeder BestFit filter element part number of the 39Q housing-size family.
Excellement® Z-Media® (Synthetic)Filter media execution.
1 µmNominal filter rating as printed in the Schroeder catalog.
β≥1000Absolute rating: 4.2 µm particle size at β(c) ≥ 1000, 99.9% efficiency.
152 mmOuter diameter.
104 mmInner diameter.
983 mmElement height.
10.3 barElement collapse pressure rating.
Fluorocarbon (Viton)Seal compound.

Typical equipment & applications

Replacement element for Schroeder hydraulic and lube filter housings
Industrial and mobile hydraulic filtration

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
Fine 1 µm media loads faster and runs at a higher cold Δp than coarser grades — only downgrade cleanliness targets if the system ISO 4406 code allows it.
End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.

Frequently asked questions

What are the dimensions of the 39QZ1V filter element?

The published envelope is 152 mm OD × 983 mm length with a 104 mm inside diameter (5.984 × 38.701 in × 4.094 in ID). Confirm against the housing drawing before ordering.

What micron rating does 39QZ1V use?

This element is rated 1 µm (nominal class) — 4.2 µm at β(c) ≥ 1000 (99.9% efficiency). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the 39QZ1V filter element?

78 partial match(es) requiring parameter review

How do I read the 39QZ1V part number?

See the designation decoder above: each segment of 39QZ1V encodes size, line type, filtration grade and media/collapse execution.

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

How often should a hydraulic return-line element be replaced?

Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.

Same-envelope elements from other brands

View full interchange →

These 21 catalog element(s) share the 152×983 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

39Q10V Schroeder Industries · 10 µm 39Q150PSV Schroeder Industries · 150 µm 39Q60PSV Schroeder Industries · 60 µm 39QAS10V Schroeder Industries · 10 µm 39QAS3V Schroeder Industries · 3 µm 39QAS5V Schroeder Industries · 5 µm 39QM150V Schroeder Industries · 150 µm 39QM25V Schroeder Industries · 25 µm 39QM60V Schroeder Industries · 60 µm 39QWV Schroeder Industries

Other models in the BestFit Elements series

All 1082 →

10DVZ1 74×249 mm · 1 µm 10DVZ10 74×249 mm · 10 µm 10DVZ10V 74×249 mm · 10 µm 10DVZ25 74×249 mm · 25 µm 10DVZ3 74×249 mm · 3 µm 10DVZ5 74×249 mm · 5 µm 13HAS10 91×328 mm · 10 µm 13HASX10 91×328 mm · 10 µm 13HZ10 91×328 mm · 10 µm 13HZ10V 91×328 mm · 10 µm

Reviewed & verified by the ElementRef engineering desk against Schroeder Industries on 2026-09-28. Read our editorial & correction policy.