Filtrec · Filtrec elements · inline line
R434G03V filter element: specifications & equivalents
The R434G03V is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 152 × 980 mm OD × length (ID 105.5 mm), rated at 5 µm absolute (β5(c)≥1000). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 152 × 980 mm
Inside diameter 105.5 mm
Filtration rating 5 µm abs.
Beta rating β 5(c)≥1000
Media glassfiber
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | glassfiber |
| Filtration rating | 5 µm |
| Rating basis | absolute |
| Beta ratio | β5(c)≥1000 |
| Outside diameter OD | 152 mm |
| Inside diameter ID | 105.5 mm |
| Length | 980 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | R434G03V |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 152 mm (5.984 in) |
| Inside diameter | 105.5 mm (4.154 in) |
| Overall length | 980 mm (38.583 in) |
All 152×980 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ 39QPML-Z3V | Schroeder Industries | full | Filtrec's official Cross Navigator maps SCHROEDER 39QPMLZ3V to FILTREC R434G03V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ 932872Q | Parker | full | Filtrec's official Cross Navigator maps PARKER 932872Q to FILTREC R434G03V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ F830039K3V page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps FILTER MART F830039K3V to FILTREC R434G03V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HC8300FCP39Z | Pall | full | Filtrec's official Cross Navigator maps PALL HC8300FCP39Z to FILTREC R434G03V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HF30635 | Fleetguard | full | Filtrec's official Cross Navigator maps FLEETGUARD HF30635 to FILTREC R434G03V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HF7408 | Fleetguard | full | Filtrec's official Cross Navigator maps FLEETGUARD HF7408 to FILTREC R434G03V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ P566245 | Donaldson | full | Filtrec's official Cross Navigator maps DONALDSON P566245 to FILTREC R434G03V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ SBF-8300-39Z1V | Schroeder Industries | full | Filtrec's official Cross Navigator maps SCHROEDER SBF830039Z1V to FILTREC R434G03V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ SBF-8300-39Z3V | Schroeder Industries | full | Filtrec's official Cross Navigator maps SCHROEDER SBF830039Z3V to FILTREC R434G03V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ V0411V8C03 | Eaton / Internormen | full | Filtrec's official Cross Navigator maps VICKERS V0411V8C03 to FILTREC R434G03V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ 39QZ1V | Schroeder Industries | partial | Filtrec's official Cross Navigator maps SCHROEDER 39QZ1V to FILTREC R434G03V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (1 vs 5 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ 39QZ3V | Schroeder Industries | partial | Filtrec's official Cross Navigator maps SCHROEDER 39QZ3V to FILTREC R434G03V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (3 vs 5 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ SP-300-E-03-V | STAUFF | partial | STAUFF Filter Interchange lists R434G03V (FILTREC) as replaced by SP-300-E-03-V. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the R434G03V model number is decoded
- G03Filtrec internal media grade code (glassfiber, 5 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (R family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Fine 5 µm media loads faster and runs at a higher cold Δp than coarser grades — only downgrade cleanliness targets if the system ISO 4406 code allows it.
Frequently asked questions
What are the dimensions of the R434G03V filter element?
The published envelope is 152 mm OD × 980 mm length with a 105.5 mm inside diameter (5.984 × 38.583 in × 4.154 in ID). Confirm against the housing drawing before ordering.
What micron rating does R434G03V use?
This element is rated 5 µm absolute — β5(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the R434G03V filter element?
10 catalog-confirmed full match(es) (39QPML-Z3V, 932872Q, F830039K3V…); 3 partial match(es) requiring parameter review
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
Same-envelope elements from other brands
View full interchange →These 59 catalog element(s) share the 152×980 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
05.8300.12.200.10.B.P.39 05.8300.12.200.10.B.V.3 05.8300.1VG.10.B.P.39 05.8300.1VG.10.B.V.39 05.8300.3VG.10.B.V.39 05.8300.40G.10.B.P.39 R434C10 R434C25 R434C25V R434G01
Other models in the Filtrec elements series
All 9874 (list page 10/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.