Schroeder Industries · BestFit Elements · inline line

39QM60V filter element: specifications & equivalents

Q: What are the dimensions of the 39QM60V filter element?

The published envelope is 152 mm OD × 983 mm length with a 104 mm inside diameter (5.984 × 38.701 in × 4.094 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does 39QM60V use?

This element is rated 60 µm (nominal class) — β(c) ≥ 1000 (99.9% efficiency). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The 39QM60V is a Schroeder Industries inline-line hydraulic filter element, built with metal mesh media media, sized 152 × 983 mm OD × length (ID 104 mm), rated at 60 µm class (β(c) ≥ 1000 (99.9% efficiency)). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 152 × 983 mm

Inside diameter 104 mm

Filtration rating 60 µm nom.

Beta rating β (c) ≥ 1000 (99.9% efficiency)

Media Metal Mesh Media

Collapse / burst 10.3 bar

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.

Dimensions, ratings and seal compound are taken from the Schroeder Industries online catalog. The nominal µm rating and the β200 absolute rating use different conventions — match the existing media grade before substituting; verify against the current Schroeder data sheet before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	Metal Mesh Media
Filtration rating	60 µm
Rating basis	nominal
Beta ratio	β(c) ≥ 1000 (99.9% efficiency)
Outside diameter OD	152 mm
Inside diameter ID	104 mm
Length	983 mm
End caps	open-ended cartridge element
Collapse / burst pressure	10.3 bar
Integral bypass valve	none (housing/valve-dependent)
Seal material	Fluorocarbon (Viton)
Operating temperature	-29 to 121 °C
Mass	5080 g
Source catalog	Schroeder Industries: Schroeder Industries online catalog (catalog.schroederindustries.com)
Last verified	2026-09-28

Sources: Schroeder Industries — Schroeder Industries online catalog (catalog.schroederindustries.com) — accessed 2026-09-28.

Schroeder Industries® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Schroeder Industries distributor.

Dimensions & series range

Outside diameter	152 mm (5.984 in)
Inside diameter	104 mm (4.094 in)
Overall length	983 mm (38.701 in)

All 152×983 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 941698	Parker	partial	Parker ParFit interchange — Schroeder 39QM60V replaced by Parker 941698. Envelope match; verify grade and seals.
↔ 9439S060020 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEEBACH/SEETECH); envelope match — verify grade and seals.
↔ SA60WV83L39 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEEBACH/SEETECH); envelope match — verify grade and seals.
↔ SWL3983V060 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEEBACH/SEETECH); envelope match — verify grade and seals.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

How the 39QM60V model number is decoded

39QM60VSchroeder BestFit filter element part number of the 39Q housing-size family.
Metal Mesh MediaFilter media execution.
60 µmNominal filter rating as printed in the Schroeder catalog.
β≥1000Absolute rating: β(c) ≥ 1000, 99.9% efficiency.
152 mmOuter diameter.
104 mmInner diameter.
983 mmElement height.
10.3 barElement collapse pressure rating.
Fluorocarbon (Viton)Seal compound.

Typical equipment & applications

Replacement element for Schroeder hydraulic and lube filter housings
Industrial and mobile hydraulic filtration

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.

Frequently asked questions

What are the dimensions of the 39QM60V filter element?

The published envelope is 152 mm OD × 983 mm length with a 104 mm inside diameter (5.984 × 38.701 in × 4.094 in ID). Confirm against the housing drawing before ordering.

What micron rating does 39QM60V use?

This element is rated 60 µm (nominal class) — β(c) ≥ 1000 (99.9% efficiency). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the 39QM60V filter element?

4 partial match(es) requiring parameter review

How do I read the 39QM60V part number?

See the designation decoder above: each segment of 39QM60V encodes size, line type, filtration grade and media/collapse execution.

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

How often should a hydraulic return-line element be replaced?

Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.

Same-envelope elements from other brands

View full interchange →

These 21 catalog element(s) share the 152×983 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

39Q10V Schroeder Industries · 10 µm 39Q150PSV Schroeder Industries · 150 µm 39Q60PSV Schroeder Industries · 60 µm 39QAS10V Schroeder Industries · 10 µm 39QAS3V Schroeder Industries · 3 µm 39QAS5V Schroeder Industries · 5 µm 39QM150V Schroeder Industries · 150 µm 39QM25V Schroeder Industries · 25 µm 39QWV Schroeder Industries 39QZ10V Schroeder Industries · 10 µm

Other models in the BestFit Elements series

All 1082 →

10DVZ1 74×249 mm · 1 µm 10DVZ10 74×249 mm · 10 µm 10DVZ10V 74×249 mm · 10 µm 10DVZ25 74×249 mm · 25 µm 10DVZ3 74×249 mm · 3 µm 10DVZ5 74×249 mm · 5 µm 13HAS10 91×328 mm · 10 µm 13HASX10 91×328 mm · 10 µm 13HZ10 91×328 mm · 10 µm 13HZ10V 91×328 mm · 10 µm

Reviewed & verified by the ElementRef engineering desk against Schroeder Industries on 2026-09-28. Read our editorial & correction policy.