Filtrec · Filtrec elements · inline line
A413G40 filter element: specifications & equivalents
The A413G40 is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 95 × 241.5 mm OD × length, rated at 35 µm absolute (β35(c)≥1000). Verify against the current manufacturer data sheet before ordering.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | glassfiber |
| Filtration rating | 35 µm |
| Rating basis | absolute |
| Beta ratio | β35(c)≥1000 |
| Outside diameter OD | 95 mm |
| Length | 241.5 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | A413G40 |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 95 mm (3.740 in) |
| Overall length | 241.5 mm (9.508 in) |
All 95×242 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ P7319 page in verification queue | Donaldson | full | Filtrec's official Cross Navigator maps FRAM P7319 to FILTREC A413G40 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ 51498 | WIX Filters | partial | Filtrec's official Cross Navigator maps WIX 51498 to FILTREC A413G40 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (33 vs 35 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ 51819 | WIX Filters | partial | Filtrec's official Cross Navigator maps WIX 51819 to FILTREC A413G40 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (15 vs 35 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ HF6557 | Fleetguard | partial | Filtrec's official Cross Navigator maps FLEETGUARD HF6557 to FILTREC A413G40 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (9 vs 35 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ P165338 | Donaldson | partial | Filtrec's official Cross Navigator maps DONALDSON P165338 to FILTREC A413G40 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (50 vs 35 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the A413G40 model number is decoded
- G40Filtrec internal media grade code (glassfiber, 35 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (A family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Frequently asked questions
What are the dimensions of the A413G40 filter element?
What micron rating does A413G40 use?
What replaces the A413G40 filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Same-envelope elements from other brands
View full interchange →These 11 catalog element(s) share the 95×242 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Filtrec elements series
All 9874 (list page 1/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.