Filtrec · Filtrec elements · inline line

A413G06 filter element: specifications & equivalents

Q: What are the dimensions of the A413G06 filter element?

The published envelope is 95 mm OD × 241.5 mm length (3.740 × 9.508 in). Confirm against the housing drawing before ordering.

Q: What micron rating does A413G06 use?

This element is rated 7 µm absolute — β7(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The A413G06 is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 95 × 241.5 mm OD × length, rated at 7 µm absolute (β7(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 95 × 241.5 mm

Filtration rating 7 µm abs.

Beta rating β 7(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	7 µm
Rating basis	absolute
Beta ratio	β7(c)≥1000
Outside diameter OD	95 mm
Length	241.5 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	A413G06
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	95 mm (3.740 in)
Overall length	241.5 mm (9.508 in)

All 95×242 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 1511138 page in verification queue	UFI	full	Filtrec's official Cross Navigator maps SAUER SUNDSTRAND 1511138 to FILTREC A413G06 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ BT8853-MPG	Baldwin Filters	full	Filtrec's official Cross Navigator maps BALDWIN BT8853MPG to FILTREC A413G06 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ P165332	Donaldson	full	Filtrec's official Cross Navigator maps DONALDSON P165332 to FILTREC A413G06 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ PT8377MPG page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps BALDWIN PT8377MPG to FILTREC A413G06 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 51496	WIX Filters	partial	Filtrec's official Cross Navigator maps WIX 51496 to FILTREC A413G06 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (3 vs 7 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ 9.04.10MA05BN	HYDAC	partial	Filtrec's official Cross Navigator maps HYDAC 90410MA05BN to FILTREC A413G06 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (5 vs 7 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HF6551	Fleetguard	partial	Filtrec's official Cross Navigator maps FLEETGUARD HF6551 to FILTREC A413G06 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (1 vs 7 µm) — verify efficiency class and collapse/seal for the housing before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the A413G06 model number is decoded

G06Filtrec internal media grade code (glassfiber, 7 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (A family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the A413G06 filter element?

The published envelope is 95 mm OD × 241.5 mm length (3.740 × 9.508 in). Confirm against the housing drawing before ordering.

What micron rating does A413G06 use?

This element is rated 7 µm absolute — β7(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the A413G06 filter element?

4 catalog-confirmed full match(es) (1511138, BT8853-MPG, P165332…); 3 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 11 catalog element(s) share the 95×242 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

A413C05 Filtrec · 5 µm A413C10 Filtrec · 10 µm A413C15 Filtrec · 15 µm A413C25 Filtrec · 25 µm A413G10 Filtrec · 12 µm A413G15 Filtrec · 17 µm A413G15R Filtrec · 17 µm A413G15V Filtrec · 17 µm A413G25 Filtrec · 22 µm A413G40 Filtrec · 35 µm

Other models in the Filtrec elements series

All 9874 (list page 1/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.