Filtrec · Filtrec elements · inline line

A413G15 filter element: specifications & equivalents

Q: What are the dimensions of the A413G15 filter element?

The published envelope is 95 mm OD × 241.5 mm length (3.740 × 9.508 in). Confirm against the housing drawing before ordering.

Q: What micron rating does A413G15 use?

This element is rated 17 µm absolute — β17(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The A413G15 is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 95 × 241.5 mm OD × length, rated at 17 µm absolute (β17(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 95 × 241.5 mm

Filtration rating 17 µm abs.

Beta rating β 17(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	17 µm
Rating basis	absolute
Beta ratio	β17(c)≥1000
Outside diameter OD	95 mm
Length	241.5 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	A413G15
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	95 mm (3.740 in)
Overall length	241.5 mm (9.508 in)

All 95×242 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 9576P164378 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FORD 9576P164378 to FILTREC A413G15 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ BT8851-MPG	Baldwin Filters	full	Filtrec's official Cross Navigator maps BALDWIN BT8851MPG to FILTREC A413G15 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ D516823 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps DAEWOO D516823 to FILTREC A413G15 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ K1022788 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps DOOSAN K1022788 to FILTREC A413G15 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ P174650 page in verification queue	Donaldson	full	Filtrec's official Cross Navigator maps DONALDSON P174650 to FILTREC A413G15 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 51492	WIX Filters	partial	Filtrec's official Cross Navigator maps WIX 51492 to FILTREC A413G15 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (15 vs 17 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ 51494	WIX Filters	partial	Filtrec's official Cross Navigator maps WIX 51494 to FILTREC A413G15 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (5 vs 17 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HF6551	Fleetguard	partial	Fleetguard's online catalog lists A413G15 as an interchange for HF6551. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ HF6553	Fleetguard	partial	Filtrec's official Cross Navigator maps FLEETGUARD HF6553 to FILTREC A413G15 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (3 vs 17 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ P177047	Donaldson	partial	Filtrec's official Cross Navigator maps DONALDSON P177047 to FILTREC A413G15 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (14 vs 17 µm) — verify efficiency class and collapse/seal for the housing before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the A413G15 model number is decoded

G15Filtrec internal media grade code (glassfiber, 17 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (A family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the A413G15 filter element?

The published envelope is 95 mm OD × 241.5 mm length (3.740 × 9.508 in). Confirm against the housing drawing before ordering.

What micron rating does A413G15 use?

This element is rated 17 µm absolute — β17(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the A413G15 filter element?

5 catalog-confirmed full match(es) (9576P164378, BT8851-MPG, D516823…); 5 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 11 catalog element(s) share the 95×242 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

A413C05 Filtrec · 5 µm A413C10 Filtrec · 10 µm A413C15 Filtrec · 15 µm A413C25 Filtrec · 25 µm A413G06 Filtrec · 7 µm A413G10 Filtrec · 12 µm A413G15R Filtrec · 17 µm A413G15V Filtrec · 17 µm A413G25 Filtrec · 22 µm A413G40 Filtrec · 35 µm

Other models in the Filtrec elements series

All 9874 (list page 1/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.