Envelope interchange · 1.77×8.23 in
45×209 mm filter elements
33 elements from 5 brand(s) share this envelope: 45 mm outside diameter and 209 mm overall length (1.77×8.23 in).
Dimensional interchange — verify before substituting. These cartridges fit the
same bowl space; they are not guaranteed drop-in equivalents. Compare grade,
end caps, seals, collapse rating and bypass configuration for the specific duty.
| Model | Brand | ID (mm) | Micron | β rating | Collapse (bar) | Bypass | Seal | Type |
|---|---|---|---|---|---|---|---|---|
| 57857 | WIX Filters | 25 | 3 | β3 = 200 | — | housing | Nitrile (NBR) | return |
| 57861 | WIX Filters | 25 | 25 | — | — | housing | Nitrile (NBR) | return |
| HD514/2 | MANN-FILTER | 26 | — | — | — | housing | — | inline |
| HF29217 | Fleetguard | — | — | 9.9 µm at β200(c); 12.4 µm at β1000(c) per ISO 16889 | — | housing | — | inline |
| HF30566 | Fleetguard | 25.5 | — | — | — | housing | — | inline |
| HF30638 | Fleetguard | 25.5 | — | — | — | housing | — | inline |
| 05.9020.3VG.10.E.P.8 | Eaton / Internormen | — | 5 | — | 10 | housing | Nitrile (Buna-N) | inline |
| 05.9020.12.200.10.E.P.8 | Eaton / Internormen | — | 10 | — | 10 | housing | Nitrile (Buna-N) | inline |
| 05.9020.25VG.10.E.P.8 | Eaton / Internormen | — | 20 | — | 10 | housing | Nitrile (Buna-N) | inline |
| D112C10A | Filtrec | 25.5 | 10 | β10(c)≥2 | — | housing | — | inline |
| D112C10AV | Filtrec | 25.5 | 10 | β10(c)≥2 | — | housing | — | inline |
| D112C25A | Filtrec | 25.5 | 25 | β25(c)≥2 | — | housing | — | inline |
| D112C25AV | Filtrec | 25.5 | 25 | β25(c)≥2 | — | housing | — | inline |
| D112G01A | Filtrec | 25.5 | 4 | β4(c)≥1000 | — | housing | — | inline |
| D112G01AV | Filtrec | 25.5 | 4 | β4(c)≥1000 | — | housing | — | inline |
| D112G01AV/ESD | Filtrec | 25.5 | 4 | β4(c)≥1000 | — | housing | — | inline |
| D112G03A | Filtrec | 25.5 | 5 | β5(c)≥1000 | — | housing | — | inline |
| D112G03AV | Filtrec | 25.5 | 5 | β5(c)≥1000 | — | housing | — | inline |
| D112G03AV/ESD | Filtrec | 25.5 | 5 | β5(c)≥1000 | — | housing | — | inline |
| D112G06A | Filtrec | 25.5 | 7 | β7(c)≥1000 | — | housing | — | inline |
| D112G06AV | Filtrec | 25.5 | 7 | β7(c)≥1000 | — | housing | — | inline |
| D112G06AV/ESD | Filtrec | 25.5 | 7 | β7(c)≥1000 | — | housing | — | inline |
| D112G10A | Filtrec | 25.5 | 12 | β12(c)≥1000 | — | housing | — | inline |
| D112G10AV | Filtrec | 25.5 | 12 | β12(c)≥1000 | — | housing | — | inline |
| D112G10AV/ESD | Filtrec | 25.5 | 12 | β12(c)≥1000 | — | housing | — | inline |
| D112G25A | Filtrec | 25.5 | 22 | β22(c)≥1000 | — | housing | — | inline |
| D112G25AV | Filtrec | 25.5 | 22 | β22(c)≥1000 | — | housing | — | inline |
| D112G25AV/ESD | Filtrec | 25.5 | 22 | β22(c)≥1000 | — | housing | — | inline |
| D112P40V | Filtrec | 25.5 | — | — | — | housing | — | inline |
| D112T100A | Filtrec | 25.5 | 100 | — | — | housing | — | inline |
| D112T10A | Filtrec | 25.5 | 10 | — | — | housing | — | inline |
| D112T10AV | Filtrec | 25.5 | 10 | — | — | housing | — | inline |
| D112T60A | Filtrec | 25.5 | 60 | — | — | housing | — | inline |
Substitution verification checklist
- Filtration grade. Compare at the same ISO 16889 Beta test point — “10 µm nominal” and “12 µm β1000” may be the same physical media.
- End caps & O-rings. Open/closed cap style and seal position block interchange even with identical OD/length.
- Seal compound. NBR is standard for mineral oil; phosphate-esters, high temperatures or bio-oils can demand fluorocarbon.
- Collapse rating. Low-collapse (~20 bar) return elements must never replace high-collapse (210 bar) pressure elements.
- Bypass strategy. Integral bypass valves (e.g. 3.4 bar) vs reusable housing valves change cold-start behaviour.
Frequently asked questions
Are all 45×209 mm filter elements interchangeable?
They share the same physical envelope — 45 mm OD and 209 mm length (1.77×8.23 in) — so they fit the same bowl. Interchangeability ends there: micron/Beta rating, end-cap geometry, seals, collapse rating and bypass configuration differ across the 33 elements listed and must be checked against the duty.
Is it a drop-in replacement if the OD and length match?
Only after verification. Confirm in order: (1) the filtration grade meets the ISO 4406 cleanliness target at the same Beta test point, (2) end-cap and O-ring arrangement is identical, (3) seal compound suits the fluid (NBR vs fluorocarbon), (4) collapse/burst rating fits pressure-line or cold-start conditions, and (5) the bypass strategy (integral valve vs housing valve) matches.
What is 45×209 mm in inches?
45×209 mm converts to approximately 1.77×8.23 in.
Browse all 45 mm OD elements or open the dimensions finder.
Request quote & availability
First reply within 2 business hours · first quotation — including the original brand and 1–2 verified equivalents — within 24 hours on business days.