Filtrec · Filtrec elements · inline line

D112G25AV filter element: specifications & equivalents

Q: What are the dimensions of the D112G25AV filter element?

The published envelope is 45 mm OD × 209 mm length with a 25.5 mm inside diameter (1.772 × 8.228 in × 1.004 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does D112G25AV use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The D112G25AV is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 45 × 209 mm OD × length (ID 25.5 mm), rated at 22 µm absolute (β22(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 45 × 209 mm

Inside diameter 25.5 mm

Filtration rating 22 µm abs.

Beta rating β 22(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	22 µm
Rating basis	absolute
Beta ratio	β22(c)≥1000
Outside diameter OD	45 mm
Inside diameter ID	25.5 mm
Length	209 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	D112G25AV
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	45 mm (1.772 in)
Inside diameter	25.5 mm (1.004 in)
Overall length	209 mm (8.228 in)

All 45×209 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 10708D25BNV page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps HYDAC 10708D25BNV to FILTREC D112G25AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 1400EAM252F2 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps PUROLATOR 1400EAM252F2 to FILTREC D112G25AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 930370Q	Parker	full	Filtrec's official Cross Navigator maps PARKER 930370Q to FILTREC D112G25AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ F90208K25V page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FILTER MART F90208K25V to FILTREC D112G25AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ H90208020BNV page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps HYCON H90208020BNV to FILTREC D112G25AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ QH9020A25V08 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps QUALITY FILTRATION QH9020A25V08 to FILTREC D112G25AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SBF-9020-8Z25V	Schroeder Industries	full	Filtrec's official Cross Navigator maps SCHROEDER SBF90208Z25V to FILTREC D112G25AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 57861	WIX Filters	partial	Filtrec's official Cross Navigator maps WIX 57861 to FILTREC D112G25AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (25 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HC9020FCT8Z	Pall	partial	Filtrec's official Cross Navigator maps PALL HC9020FCT8Z to FILTREC D112G25AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (25 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HF30728	Fleetguard	partial	Fleetguard's online catalog lists D112G25AV as an interchange for HF30728. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ P566203	Donaldson	partial	Filtrec's official Cross Navigator maps DONALDSON P566203 to FILTREC D112G25AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (23 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the D112G25AV model number is decoded

G25Filtrec internal media grade code (glassfiber, 22 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (D family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the D112G25AV filter element?

The published envelope is 45 mm OD × 209 mm length with a 25.5 mm inside diameter (1.772 × 8.228 in × 1.004 in ID). Confirm against the housing drawing before ordering.

What micron rating does D112G25AV use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the D112G25AV filter element?

7 catalog-confirmed full match(es) (10708D25BNV, 1400EAM252F2, 930370Q…); 4 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 32 catalog element(s) share the 45×209 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

05.9020.12.200.10.E.P.8 Eaton / Internormen · 10 µm 05.9020.25VG.10.E.P.8 Eaton / Internormen · 20 µm 05.9020.3VG.10.E.P.8 Eaton / Internormen · 5 µm D112C10A Filtrec · 10 µm D112C10AV Filtrec · 10 µm D112C25A Filtrec · 25 µm D112C25AV Filtrec · 25 µm D112G01A Filtrec · 4 µm D112G01AV Filtrec · 4 µm D112G01AV/ESD Filtrec · 4 µm

Other models in the Filtrec elements series

All 9874 (list page 2/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.