Filtrec · Filtrec elements · inline line
D112G06A filter element: specifications & equivalents
The D112G06A is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 45 × 209 mm OD × length (ID 25.5 mm), rated at 7 µm absolute (β7(c)≥1000). Verify against the current manufacturer data sheet before ordering.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | glassfiber |
| Filtration rating | 7 µm |
| Rating basis | absolute |
| Beta ratio | β7(c)≥1000 |
| Outside diameter OD | 45 mm |
| Inside diameter ID | 25.5 mm |
| Length | 209 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | D112G06A |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 45 mm (1.772 in) |
| Inside diameter | 25.5 mm (1.004 in) |
| Overall length | 209 mm (8.228 in) |
All 45×209 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ H90208005BN page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps HYCON H90208005BN to FILTREC D112G06A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HC9020FCN8H | Pall | full | Filtrec's official Cross Navigator maps PALL HC9020FCN8H to FILTREC D112G06A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HC9020FKN8H | Pall | full | Filtrec's official Cross Navigator maps PALL HC9020FKN8H to FILTREC D112G06A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HF7045 | Fleetguard | full | Filtrec's official Cross Navigator maps FLEETGUARD HF7045 to FILTREC D112G06A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ QH9020A06B08 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps QUALITY FILTRATION QH9020A06B08 to FILTREC D112G06A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ SP-020-E-05-B | STAUFF | full | Filtrec's official Cross Navigator maps STAUFF SP020E05B to FILTREC D112G06A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ V3041B2C05 | Eaton / Internormen | full | Filtrec's official Cross Navigator maps VICKERS V3041B2C05 to FILTREC D112G06A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ 8YZ5 | Schroeder Industries | partial | Filtrec's official Cross Navigator maps SCHROEDER 8YZ5 to FILTREC D112G06A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (5 vs 7 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ H9046 | Baldwin Filters | partial | Baldwin's Form 561 Number-Finder cross-reference lists D112G06A (FILTREC) as replaced by Baldwin H9046. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HD514/1 | MANN-FILTER | partial | MANN-FILTER's online catalog lists D112G06A (FILTREC) as a comparison number for HD5141. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF30062 | Fleetguard | partial | Fleetguard's online catalog lists D112G06A as an interchange for HF30062. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SBF-9020-8Z5B | Schroeder Industries | partial | Schroeder online cross-reference (FILTREC); envelope match — verify grade and seals. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the D112G06A model number is decoded
- G06Filtrec internal media grade code (glassfiber, 7 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (D family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Frequently asked questions
What are the dimensions of the D112G06A filter element?
What micron rating does D112G06A use?
What replaces the D112G06A filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Same-envelope elements from other brands
View full interchange →These 32 catalog element(s) share the 45×209 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Filtrec elements series
All 9874 (list page 2/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.