WIX Filters · 57xxx · return line
57523 filter element: specifications & equivalents
The 57523 is a WIX Filters return-line hydraulic filter element, built with microglass media, sized 94 × 195 mm OD × length (ID 48 mm), rated at 3 µm class (β3 = 200). Verify against the current manufacturer data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | return line |
| Media | Microglass |
| Filtration rating | 3 µm |
| Rating basis | nominal |
| Beta ratio | β3 = 200 |
| Outside diameter OD | 94 mm |
| Inside diameter ID | 48 mm |
| Length | 195 mm |
| End caps | open-ended cartridge element (no baseplate) |
| Flow direction | outside-in |
| Integral bypass valve | opens at 2.965 bar |
| Seal material | Nitrile (NBR) |
| Manufacturer part no. | 57523 |
| Source catalog | WIX Filters (MANN+HUMMEL): WIX Filters online product catalog |
| Last verified | 2026-09-28 |
Sources: WIX Filters (MANN+HUMMEL) — WIX Filters online product catalog — accessed 2026-09-26.
WIX Filters® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized WIX Filters distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 94 mm (3.701 in) |
| Inside diameter | 48 mm (1.890 in) |
| Overall length | 195 mm (7.677 in) |
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ HD950 | MANN-FILTER | partial | MANN-FILTER's online catalog lists 57523 (WIX) as a comparison number for HD950. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6891 | Fleetguard | partial | Fleetguard's online catalog lists 57523 as an interchange for HF6891. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ RHR330G03V3/AB1 | Filtrec | partial | Filtrec's official Cross Navigator maps WIX 57523 to FILTREC RHR330G03V3/AB1 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (3 vs 5 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: WIX Filters cross reference chart →
How the 57523 model number is decoded
- 57523WIX hydraulic cartridge element part number.
- 94 mm OD / 48 mm IDCartridge envelope (outside/inside diameter); no mounting thread.
- MicroglassFilter media: Microglass.
Typical equipment & applications
- Mobile and industrial hydraulic return circuits
- Construction and agricultural equipment
- Heavy-duty transmission and torque-converter circuits
Selection pitfalls — read before you substitute
- Line type is not interchangeable: return-line cartridges are low-collapse executions that typically tolerate roughly 10–20 bar differential, while pressure-line elements are commonly rated 100–210 bar. Installing a low-collapse element in a pressure housing can rupture the media on cold-start spikes.
- This execution carries an integral bypass valve (opens at 2.965 bar). The same envelope also exists without it, relying on the housing valve. Mixing the two strategies changes cold-start protection — match what was installed originally.
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- This execution uses nitrile (nbr) seals — verify the compound against the fluid data sheet: standard nitrile (NBR) can fail early in phosphate-ester fluids and at sustained high temperature, where fluorocarbon/Viton executions may be required.
- Fine 3 µm media loads faster and runs at a higher cold Δp than coarser grades — only downgrade cleanliness targets if the system ISO 4406 code allows it.
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the 57523 filter element?
What micron rating does 57523 use?
What replaces the 57523 filter element?
How do I read the 57523 part number?
Is a same-envelope aftermarket element always a drop-in replacement?
How often should a hydraulic filter element be replaced?
Other models in the 57xxx series
All 221 →Reviewed & verified by the ElementRef engineering desk against WIX Filters (MANN+HUMMEL) on 2026-09-28. Read our editorial & correction policy.