STAUFF · Replacement Elements · inline line

SS-012-B-100-B filter element: specifications & equivalents

Q: What are the dimensions of the SS-012-B-100-B filter element?

The published envelope is 44.5 mm OD × 83 mm length with a 24.3 mm inside diameter (1.752 × 3.268 in × 0.957 in ID). Confirm against the housing drawing before ordering.

The SS-012-B-100-B is a STAUFF inline-line hydraulic filter element, sized 44.5 × 83 mm OD × length (ID 24.3 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 44.5 × 83 mm

Inside diameter 24.3 mm

Line type inline

Partially verified. Fit and grade trace to an official interchange document; dimensional values are compiled from 0 aftermarket listing(s) and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.

Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.

Specification table

Parameter	Value
Filter type	inline line
Outside diameter OD	44.5 mm
Inside diameter ID	24.3 mm
Length	83 mm
Integral bypass valve	none (housing/valve-dependent)
Source catalog	STAUFF: STAUFF Filter Interchange online database (filterinterchange.com)
Last verified	2026-09-28

Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.

STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	44.5 mm (1.752 in)
Inside diameter	24.3 mm (0.957 in)
Overall length	83 mm (3.268 in)

All 45×83 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 20004G100A000M page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 2.0004G100 A00-0-M (EPE / Bosch-Rexroth Filtration) as replaced by SS-012-B-100-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 20004G100A000P page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 2.0004G100 A00-0-P (EPE / Bosch-Rexroth Filtration) as replaced by SS-012-B-100-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ DVD20004B100B	Filtrec	partial	STAUFF Filter Interchange lists DVD20004B100B (FILTREC) as replaced by SS-012-B-100-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ E20004DN3100 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists E20004DN3100 (COMEX / Ecoparts) as replaced by SS-012-B-100-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HY11978 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists HY 11978 (SF-FILTER) as replaced by SS-012-B-100-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: STAUFF cross reference chart →

How the SS-012-B-100-B model number is decoded

SS-012-B-100-BSTAUFF replacement element part number per the STAUFF Filter Interchange database.

Typical equipment & applications

Replacement element for OEM hydraulic filter housings

Frequently asked questions

What are the dimensions of the SS-012-B-100-B filter element?

The published envelope is 44.5 mm OD × 83 mm length with a 24.3 mm inside diameter (1.752 × 3.268 in × 0.957 in ID). Confirm against the housing drawing before ordering.

What replaces the SS-012-B-100-B filter element?

5 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 31 catalog element(s) share the 45×83 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

DVD20004A10B Filtrec DVD20004B100B Filtrec · 100 µm DVD20004B100V Filtrec · 100 µm DVD20004B10B Filtrec · 10 µm DVD20004B10V Filtrec · 10 µm DVD20004B25B Filtrec · 25 µm DVD20004K10B Filtrec · 10 µm DVD20004K10V Filtrec · 10 µm DVD20004W100B Filtrec · 100 µm DVD20004W10B Filtrec · 10 µm

Other models in the Replacement Elements series

All 4930 (list page 10/10) →

AD-030-B-125-B 83×193 mm AD-030-B-40-B 83×193 mm AD-030-B-60-B 83×193 mm AD-030-B-80-B 83×193 mm AD-030-E-20-B 83×193 mm AD-033-B-40-B 89×226 mm AD-033-B-60-B 89×226 mm AD-033-B-80-B 89×226 mm AD-033-E-10-B 89×226 mm BL-200-E-10-B 86×62 mm

Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.