Filtrec · Filtrec elements · inline line

DVD20004B25B filter element: specifications & equivalents

Q: What are the dimensions of the DVD20004B25B filter element?

The published envelope is 45 mm OD × 83 mm length with a 24.2 mm inside diameter (1.772 × 3.268 in × 0.953 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does DVD20004B25B use?

This element is rated 25 µm (nominal class). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The DVD20004B25B is a Filtrec inline-line hydraulic filter element, built with wire-mesh media, sized 45 × 83 mm OD × length (ID 24.2 mm), rated at 25 µm class. Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 45 × 83 mm

Inside diameter 24.2 mm

Filtration rating 25 µm nom.

Media wire-mesh

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	wire-mesh
Filtration rating	25 µm
Rating basis	nominal
Outside diameter OD	45 mm
Inside diameter ID	24.2 mm
Length	83 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	DVD20004B25B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	45 mm (1.772 in)
Inside diameter	24.2 mm (0.953 in)
Overall length	83 mm (3.268 in)

All 45×83 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ SS-012-B-25-B	STAUFF	partial	STAUFF Filter Interchange lists DVD20004B25B (FILTREC) as replaced by SS-012-B-25-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the DVD20004B25B model number is decoded

T25Filtrec internal media grade code (wire-mesh, 25 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (DVD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the DVD20004B25B filter element?

The published envelope is 45 mm OD × 83 mm length with a 24.2 mm inside diameter (1.772 × 3.268 in × 0.953 in ID). Confirm against the housing drawing before ordering.

What micron rating does DVD20004B25B use?

This element is rated 25 µm (nominal class). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the DVD20004B25B filter element?

1 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 31 catalog element(s) share the 45×83 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

DVD20004A10B Filtrec DVD20004B100B Filtrec · 100 µm DVD20004B100V Filtrec · 100 µm DVD20004B10B Filtrec · 10 µm DVD20004B10V Filtrec · 10 µm DVD20004K10B Filtrec · 10 µm DVD20004K10V Filtrec · 10 µm DVD20004W100B Filtrec · 100 µm DVD20004W10B Filtrec · 10 µm DVD20004W10B/1 Filtrec · 10 µm

Other models in the Filtrec elements series

All 9874 (list page 8/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.