STAUFF · Replacement Elements · inline line
SP-130-F-05-V-OBE filter element: specifications & equivalents
The SP-130-F-05-V-OBE is a STAUFF inline-line hydraulic filter element, sized 80 × 429 mm OD × length (ID 43.5 mm). Verify against the current manufacturer data sheet before ordering.
Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 80 mm |
| Inside diameter ID | 43.5 mm |
| Length | 429 mm |
| End caps | open-ended cartridge element |
| Integral bypass valve | none (housing/valve-dependent) |
| Source catalog | STAUFF: STAUFF Filter Interchange online database (filterinterchange.com) |
| Last verified | 2026-09-28 |
Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.
STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 80 mm (3.150 in) |
| Inside diameter | 43.5 mm (1.713 in) |
| Overall length | 429 mm (16.890 in) |
All 80×429 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ P9651D16H2006FKM page in verification queue | Donaldson | partial | STAUFF Filter Interchange lists P9651D16H2006FKM (COMEX / Ecoparts) as replaced by SP-130-F-05-V-OBE. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
| ↔ SP-130-F-05-V-OBE | STAUFF | partial | STAUFF Filter Interchange lists SP-130-F-05-V-OBE (STAUFF) as replaced by SP-130-F-05-V-OBE. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: STAUFF cross reference chart →
How the SP-130-F-05-V-OBE model number is decoded
- SP-130-F-05-V-OBESTAUFF replacement element part number per the STAUFF Filter Interchange database.
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the SP-130-F-05-V-OBE filter element?
What replaces the SP-130-F-05-V-OBE filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Same-envelope elements from other brands
View full interchange →These 5 catalog element(s) share the 80×429 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Replacement Elements series
All 4930 (list page 9/10) →Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.