ElementRef

STAUFF · Replacement Elements · inline line

SN-014-W-125-B filter element: specifications & equivalents

The SN-014-W-125-B is a STAUFF inline-line hydraulic filter element, sized 44.5 × 110 mm OD × length (ID 22.2 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 44.5 × 110 mm
Inside diameter 22.2 mm
Line type inline
Partially verified. Fit and grade trace to an official interchange document; dimensional values are compiled from 0 aftermarket listing(s) and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.

Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.

Specification table

ParameterValue
Filter type inline line
Outside diameter OD 44.5 mm
Inside diameter ID 22.2 mm
Length 110 mm
End caps open-ended cartridge element
Integral bypass valve none (housing/valve-dependent)
Source catalog STAUFF: STAUFF Filter Interchange online database (filterinterchange.com)
Last verified2026-09-28

Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.

STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.

Dimensional drawing

SN-014-W-125-B — FILTER ELEMENTSTAUFF · Replacement Elements · inline line · dimensional reference drawingFRONT VIEWTOP VIEW110 mmØ44.5 mmØ44.5Ø22.2 boreTECHNICAL DATAElement typeinline lineOutside dia. OD44.5 mmInside dia. ID22.2 mmLength110 mmEnd capsopen-ended cartridge elementSTAUFF — STAUFF Filter Interchange online database (filterinterchange.com), accessed2026-09-27NOTES1. Dimensions in millimetres, nominal values as cited in the source line above; manufacturing tolerances and interface details per the manufacturer data sheet.2. Schematic section derived from catalog data — not a manufacturer drawing. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.3. ElementRef is an independent reference database; not affiliated with, authorised or endorsed by STAUFF.ELEMENTREF · SN-014-W-125-BDWG NO.ER-SN-014-W-125-B-DWG-01DATA DATE2026-09-28SCALE1.5:1REV.A
Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter44.5 mm (1.752 in)
Inside diameter22.2 mm (0.874 in)
Overall length110 mm (4.331 in)

All 45×110 mm interchange elements →

Cross references & equivalents

Equivalent modelBrandMatch levelNote
↔ 01E60130GHREP
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists 01E60130GHREP (INTERNORMEN) as replaced by SN-014-W-125-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ SN-014-W-125-BSTAUFFpartialSTAUFF Filter Interchange lists SN-014-W-125-B (STAUFF) as replaced by SN-014-W-125-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: STAUFF cross reference chart →

How the SN-014-W-125-B model number is decoded

  • SN-014-W-125-BSTAUFF replacement element part number per the STAUFF Filter Interchange database.

Typical equipment & applications

  • Replacement element for OEM hydraulic filter housings

Selection pitfalls — read before you substitute

  • End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.

Frequently asked questions

What are the dimensions of the SN-014-W-125-B filter element?
The published envelope is 44.5 mm OD × 110 mm length with a 22.2 mm inside diameter (1.752 × 4.331 in × 0.874 in ID). Confirm against the housing drawing before ordering.
What replaces the SN-014-W-125-B filter element?
2 partial match(es) requiring parameter review
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 110 catalog element(s) share the 45×110 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

01.E 60.10G.30.E.P.- Eaton / Internormen · 10 µm 01.E 60.10G.30.E.P.VA Eaton / Internormen · 10 µm 01.E 60.10G.30.E.V.- Eaton / Internormen · 10 µm 01.E 60.10G.30.E.V.VA Eaton / Internormen · 10 µm 01.E 60.10G.HR.E.P.- Eaton / Internormen · 10 µm 01.E 60.10G.HR.E.V.- Eaton / Internormen · 10 µm 01.E 60.10P.30.E.P.- Eaton / Internormen · 10 µm 01.E 60.10VG.30.E.EPDM.VA Eaton / Internormen · 10 µm 01.E 60.10VG.30.E.P.- Eaton / Internormen · 10 µm 01.E 60.10VG.30.E.P.IS06 Eaton / Internormen · 10 µm

Other models in the Replacement Elements series

All 4930 (list page 8/10) →
AD-030-B-125-B 83×193 mm AD-030-B-40-B 83×193 mm AD-030-B-60-B 83×193 mm AD-030-B-80-B 83×193 mm AD-030-E-20-B 83×193 mm AD-033-B-40-B 89×226 mm AD-033-B-60-B 89×226 mm AD-033-B-80-B 89×226 mm AD-033-E-10-B 89×226 mm BL-200-E-10-B 86×62 mm

Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.