STAUFF · Replacement Elements · inline line

SL-005-K-10-B filter element: specifications & equivalents

Q: What are the dimensions of the SL-005-K-10-B filter element?

The published envelope is 41.5 mm OD × 85.5 mm length with a 22.6 mm inside diameter (1.634 × 3.366 in × 0.890 in ID). Confirm against the housing drawing before ordering.

The SL-005-K-10-B is a STAUFF inline-line hydraulic filter element, sized 41.5 × 85.5 mm OD × length (ID 22.6 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 41.5 × 85.5 mm

Inside diameter 22.6 mm

Line type inline

Partially verified. Fit and grade trace to an official interchange document; dimensional values are compiled from 0 aftermarket listing(s) and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.

Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.

Specification table

Parameter	Value
Filter type	inline line
Outside diameter OD	41.5 mm
Inside diameter ID	22.6 mm
Length	85.5 mm
Integral bypass valve	none (housing/valve-dependent)
Source catalog	STAUFF: STAUFF Filter Interchange online database (filterinterchange.com)
Last verified	2026-09-28

Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.

STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	41.5 mm (1.634 in)
Inside diameter	22.6 mm (0.890 in)
Overall length	85.5 mm (3.366 in)

All 42×86 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ DMD125K10B	Filtrec	full	Filtrec's official Cross Navigator maps STAUFF SL005K10B to FILTREC DMD125K10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 153233A1 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 153233A1 (CASE) as replaced by SL-005-K-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 1820P10G000M page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 18.20 P10-G00-0-M (EPE / Bosch-Rexroth Filtration) as replaced by SL-005-K-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 1820P10G000P page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 18.20 P10-G00-0-P (EPE / Bosch-Rexroth Filtration) as replaced by SL-005-K-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 31E30018 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 31E30018 (HYUNDAI) as replaced by SL-005-K-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 31E30018A page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 31E3-0018-A (HYUNDAI) as replaced by SL-005-K-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 3743803600 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 3743803600 (HITACHI) as replaced by SL-005-K-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 39103061460 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 39103061460 (VOLVO) as replaced by SL-005-K-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 6655066 page in verification queue	UFI	partial	STAUFF Filter Interchange lists 6655066 (CLARK) as replaced by SL-005-K-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 7682636 page in verification queue	UFI	partial	STAUFF Filter Interchange lists 768.263.6 (MAHLE / Filtration Group) as replaced by SL-005-K-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 77682636 page in verification queue	UFI	partial	STAUFF Filter Interchange lists 77682636 (COMEX / Ecoparts) as replaced by SL-005-K-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 852125MIC10 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 852125 MIC 10 (MAHLE / Filtration Group) as replaced by SL-005-K-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 930827 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 930827 (HYUNDAI) as replaced by SL-005-K-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 9640012103 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 9640012103 (MAHLE / Filtration Group) as replaced by SL-005-K-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HD47X	MANN-FILTER	partial	MANN-FILTER's online catalog lists SL-005K10B (STAUFF) as a comparison number for HD47X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ MMJ80010 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists MMJ80010 (CASE) as replaced by SL-005-K-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ PI1034MIC10 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists PI 1034MIC10 (MAHLE / Filtration Group) as replaced by SL-005-K-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ R141164930 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists R141164930 (KUBOTA) as replaced by SL-005-K-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ SA103061460 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists SA103061460 (VOLVO) as replaced by SL-005-K-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ WGH9823 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists WGH 9823 (WOODGATE) as replaced by SL-005-K-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: STAUFF cross reference chart →

How the SL-005-K-10-B model number is decoded

SL-005-K-10-BSTAUFF replacement element part number per the STAUFF Filter Interchange database.

Typical equipment & applications

Replacement element for OEM hydraulic filter housings

Frequently asked questions

What are the dimensions of the SL-005-K-10-B filter element?

The published envelope is 41.5 mm OD × 85.5 mm length with a 22.6 mm inside diameter (1.634 × 3.366 in × 0.890 in ID). Confirm against the housing drawing before ordering.

What replaces the SL-005-K-10-B filter element?

1 catalog-confirmed full match(es) (DMD125K10B); 19 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 35 catalog element(s) share the 42×86 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

DMD125B100B Filtrec · 100 µm DMD125B10B Filtrec · 10 µm DMD125B25B Filtrec · 25 µm DMD125B40B Filtrec · 40 µm DMD125B60B Filtrec · 60 µm DMD125D10B Filtrec · 10 µm DMD125D10V Filtrec · 10 µm DMD125D20B Filtrec · 25 µm DMD125E03B Filtrec · 5 µm DMD125E10B Filtrec · 12 µm

Other models in the Replacement Elements series

All 4930 (list page 8/10) →

AD-030-B-125-B 83×193 mm AD-030-B-40-B 83×193 mm AD-030-B-60-B 83×193 mm AD-030-B-80-B 83×193 mm AD-030-E-20-B 83×193 mm AD-033-B-40-B 89×226 mm AD-033-B-60-B 89×226 mm AD-033-B-80-B 89×226 mm AD-033-E-10-B 89×226 mm BL-200-E-10-B 86×62 mm

Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.