Filtrec · Filtrec elements · inline line

DMD125K10B filter element: specifications & equivalents

Q: What are the dimensions of the DMD125K10B filter element?

The published envelope is 42 mm OD × 86 mm length with a 22.8 mm inside diameter (1.654 × 3.386 in × 0.898 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does DMD125K10B use?

This element is rated 10 µm (nominal class) — β10(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The DMD125K10B is a Filtrec inline-line hydraulic filter element, built with cellulose media, sized 42 × 86 mm OD × length (ID 22.8 mm), rated at 10 µm class (β10(c)≥2). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 42 × 86 mm

Inside diameter 22.8 mm

Filtration rating 10 µm nom.

Beta rating β 10(c)≥2

Media cellulose

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	cellulose
Filtration rating	10 µm
Rating basis	nominal
Beta ratio	β10(c)≥2
Outside diameter OD	42 mm
Inside diameter ID	22.8 mm
Length	86 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	DMD125K10B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	42 mm (1.654 in)
Inside diameter	22.8 mm (0.898 in)
Overall length	86 mm (3.386 in)

All 42×86 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 1820P10G000M page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps REXROTH 18.20P10G000M to FILTREC DMD125K10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 1820P10G000P page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps EPPENSTEINER 18.20P10G000P to FILTREC DMD125K10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 852125MIC10 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FILTRATION GROUP 852125MIC10 to FILTREC DMD125K10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CF8125P10NA page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI CF8125P10NA to FILTREC DMD125K10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HD47	MANN-FILTER	full	Filtrec's official Cross Navigator maps MANN + HUMMEL HD47 to FILTREC DMD125K10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ PT8392	Baldwin Filters	full	Filtrec's official Cross Navigator maps BALDWIN PT8392 to FILTREC DMD125K10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SL-005-K-10-B	STAUFF	full	Filtrec's official Cross Navigator maps STAUFF SL005K10B to FILTREC DMD125K10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 57100	WIX Filters	partial	Filtrec's official Cross Navigator maps WIX 57100 to FILTREC DMD125K10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (25 vs 10 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HD47X	MANN-FILTER	partial	MANN-FILTER's online catalog lists DMD125K10B (FILTREC) as a comparison number for HD47X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ HF28836	Fleetguard	partial	Filtrec's official Cross Navigator maps FLEETGUARD HF28836 to FILTREC DMD125K10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (39 vs 10 µm) — verify efficiency class and collapse/seal for the housing before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the DMD125K10B model number is decoded

C10Filtrec internal media grade code (cellulose, 10 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (DMD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the DMD125K10B filter element?

The published envelope is 42 mm OD × 86 mm length with a 22.8 mm inside diameter (1.654 × 3.386 in × 0.898 in ID). Confirm against the housing drawing before ordering.

What micron rating does DMD125K10B use?

This element is rated 10 µm (nominal class) — β10(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the DMD125K10B filter element?

7 catalog-confirmed full match(es) (1820P10G000M, 1820P10G000P, 852125MIC10…); 3 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 35 catalog element(s) share the 42×86 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

DMD125B100B Filtrec · 100 µm DMD125B10B Filtrec · 10 µm DMD125B25B Filtrec · 25 µm DMD125B40B Filtrec · 40 µm DMD125B60B Filtrec · 60 µm DMD125D10B Filtrec · 10 µm DMD125D10V Filtrec · 10 µm DMD125D20B Filtrec · 25 µm DMD125E03B Filtrec · 5 µm DMD125E10B Filtrec · 12 µm

Other models in the Filtrec elements series

All 9874 (list page 7/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.