STAUFF · Replacement Elements · inline line
SE-030-G-03-V filter element: specifications & equivalents
The SE-030-G-03-V is a STAUFF inline-line hydraulic filter element, sized 47 × 153 mm OD × length (ID 22.2 mm). Verify against the current manufacturer data sheet before ordering.
Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 47 mm |
| Inside diameter ID | 22.2 mm |
| Length | 153 mm |
| End caps | open-ended cartridge element |
| Integral bypass valve | none (housing/valve-dependent) |
| Source catalog | STAUFF: STAUFF Filter Interchange online database (filterinterchange.com) |
| Last verified | 2026-09-28 |
Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.
STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 47 mm (1.850 in) |
| Inside diameter | 22.2 mm (0.874 in) |
| Overall length | 153 mm (6.024 in) |
All 47×153 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 1309506 page in verification queue | UFI | partial | STAUFF Filter Interchange lists 1309506 (HYDAC) as replaced by SE-030-G-03-V. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
| ↔ DHD110G03V | Filtrec | partial | STAUFF Filter Interchange lists DHD110G03V (FILTREC) as replaced by SE-030-G-03-V. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
| ↔ HF29224 | Fleetguard | partial | Fleetguard's online catalog lists SE030G03V as an interchange for HF29224. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SBF-0110D-Z3V | Schroeder Industries | partial | Schroeder online cross-reference (STAUFF); envelope match — verify grade and seals. |
| ↔ SE-030-G-03-V | STAUFF | partial | STAUFF Filter Interchange lists SE-030-G-03-V (STAUFF) as replaced by SE-030-G-03-V. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: STAUFF cross reference chart →
How the SE-030-G-03-V model number is decoded
- SE-030-G-03-VSTAUFF replacement element part number per the STAUFF Filter Interchange database.
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the SE-030-G-03-V filter element?
What replaces the SE-030-G-03-V filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Same-envelope elements from other brands
View full interchange →These 83 catalog element(s) share the 47×153 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Replacement Elements series
All 4930 (list page 7/10) →Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.