STAUFF · Replacement Elements · inline line

RA-2000-E-10-B filter element: specifications & equivalents

Q: What are the dimensions of the RA-2000-E-10-B filter element?

The published envelope is 203 mm OD × 1090 mm length with a 157 mm inside diameter (7.992 × 42.913 in × 6.181 in ID). Confirm against the housing drawing before ordering.

The RA-2000-E-10-B is a STAUFF inline-line hydraulic filter element, sized 203 × 1090 mm OD × length (ID 157 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 203 × 1090 mm

Inside diameter 157 mm

Line type inline

Partially verified. Fit and grade trace to an official interchange document; dimensional values are compiled from 0 aftermarket listing(s) and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.

Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.

Specification table

Parameter	Value
Filter type	inline line
Outside diameter OD	203 mm
Inside diameter ID	157 mm
Length	1090 mm
Integral bypass valve	none (housing/valve-dependent)
Source catalog	STAUFF: STAUFF Filter Interchange online database (filterinterchange.com)
Last verified	2026-09-28

Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.

STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	203 mm (7.992 in)
Inside diameter	157 mm (6.181 in)
Overall length	1090 mm (42.913 in)

All 203×1090 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ R744G10	Filtrec	full	Filtrec's official Cross Navigator maps STAUFF RA2000E10B to FILTREC R744G10 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HF35134	Fleetguard	partial	Fleetguard's online catalog lists RA2000E10B as an interchange for HF35134. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ MR8504A10 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists MR8504A10 (MP-FILTRI) as replaced by RA-2000-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ MR8504A10A	MP Filtri	partial	STAUFF Filter Interchange lists MR8504A10A (MP-FILTRI) as replaced by RA-2000-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ RA-2000-E-10-B	STAUFF	partial	STAUFF Filter Interchange lists RA-2000-E-10-B (STAUFF) as replaced by RA-2000-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ TXW14CC10 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists TXW14-CC10 (FAIREY ARLON) as replaced by RA-2000-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ WGTW14CC10 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists WGTW 14CC-10 (WOODGATE) as replaced by RA-2000-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: STAUFF cross reference chart →

How the RA-2000-E-10-B model number is decoded

RA-2000-E-10-BSTAUFF replacement element part number per the STAUFF Filter Interchange database.

Typical equipment & applications

Replacement element for OEM hydraulic filter housings

Frequently asked questions

What are the dimensions of the RA-2000-E-10-B filter element?

The published envelope is 203 mm OD × 1090 mm length with a 157 mm inside diameter (7.992 × 42.913 in × 6.181 in ID). Confirm against the housing drawing before ordering.

What replaces the RA-2000-E-10-B filter element?

1 catalog-confirmed full match(es) (R744G10); 6 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 5 catalog element(s) share the 203×1090 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

HF35134 Fleetguard · 10 µm RA-2000-E-03-B STAUFF RA-2000-E-05-B STAUFF RA-2000-E-20-B STAUFF RA-2000-L-10-B STAUFF

Other models in the Replacement Elements series

All 4930 (list page 2/10) →

AD-030-B-125-B 83×193 mm AD-030-B-40-B 83×193 mm AD-030-B-60-B 83×193 mm AD-030-B-80-B 83×193 mm AD-030-E-20-B 83×193 mm AD-033-B-40-B 89×226 mm AD-033-B-60-B 89×226 mm AD-033-B-80-B 89×226 mm AD-033-E-10-B 89×226 mm BL-200-E-10-B 86×62 mm

Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.