STAUFF · Replacement Elements · inline line

NL-250-F-10-B filter element: specifications & equivalents

Q: What are the dimensions of the NL-250-F-10-B filter element?

The published envelope is 79.8 mm OD × 249 mm length with a 40.2 mm inside diameter (3.142 × 9.803 in × 1.583 in ID). Confirm against the housing drawing before ordering.

The NL-250-F-10-B is a STAUFF inline-line hydraulic filter element, sized 79.8 × 249 mm OD × length (ID 40.2 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 79.8 × 249 mm

Inside diameter 40.2 mm

Line type inline

Partially verified. Fit and grade trace to an official interchange document; dimensional values are compiled from 0 aftermarket listing(s) and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.

Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.

Specification table

Parameter	Value
Filter type	inline line
Outside diameter OD	79.8 mm
Inside diameter ID	40.2 mm
Length	249 mm
Integral bypass valve	none (housing/valve-dependent)
Source catalog	STAUFF: STAUFF Filter Interchange online database (filterinterchange.com)
Last verified	2026-09-28

Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.

STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	79.8 mm (3.142 in)
Inside diameter	40.2 mm (1.583 in)
Overall length	249 mm (9.803 in)

All 80×249 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ XD250G10B	Filtrec	full	Filtrec's official Cross Navigator maps STAUFF NL250F10B to FILTREC XD250G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 01.NL 250.10VG.HR.E.P.-	Eaton / Internormen	partial	STAUFF Filter Interchange lists 01NL25010VGHREP (INTERNORMEN) as replaced by NL-250-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 77925696 page in verification queue	UFI	partial	STAUFF Filter Interchange lists 77925696 (MAHLE / Filtration Group) as replaced by NL-250-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ ABZFEH0250101XMDIN page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists ABZFE-H0250-10-1X/M-DIN (EPE / Bosch-Rexroth Filtration) as replaced by NL-250-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ FDBE2A10QH page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists FDBE 2A10QH (PARKER) as replaced by NL-250-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ NL-250-F-10-B	STAUFF	partial	STAUFF Filter Interchange lists NL-250-F-10-B (STAUFF) as replaced by NL-250-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ PI73025DNPSVST10 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists PI 73025 DN PS VST 10 (MAHLE / Filtration Group) as replaced by NL-250-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ PI73025DNSMXVST10 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists PI 73025 DN SMX VST 10 (MAHLE / Filtration Group) as replaced by NL-250-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ PI73250DNPSVST10 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists PI 73250 DN PS VST 10 (MAHLE / Filtration Group) as replaced by NL-250-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ PI73250DNSMXVST10 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists PI 73250 DN SMX VST 10 (MAHLE / Filtration Group) as replaced by NL-250-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ R901025387 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists R901025387 (EPE / Bosch-Rexroth Filtration) as replaced by NL-250-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ ST1932 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists ST 1932 (ST) as replaced by NL-250-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: STAUFF cross reference chart →

How the NL-250-F-10-B model number is decoded

NL-250-F-10-BSTAUFF replacement element part number per the STAUFF Filter Interchange database.

Typical equipment & applications

Replacement element for OEM hydraulic filter housings

Frequently asked questions

What are the dimensions of the NL-250-F-10-B filter element?

The published envelope is 79.8 mm OD × 249 mm length with a 40.2 mm inside diameter (3.142 × 9.803 in × 1.583 in ID). Confirm against the housing drawing before ordering.

What replaces the NL-250-F-10-B filter element?

1 catalog-confirmed full match(es) (XD250G10B); 11 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 77 catalog element(s) share the 80×249 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

RVR10018A10B Filtrec RVR10018B100B Filtrec · 100 µm RVR10018B100V Filtrec · 100 µm RVR10018B10B Filtrec · 10 µm RVR10018B10V Filtrec · 10 µm RVR10018B25B Filtrec · 25 µm RVR10018B25V Filtrec · 25 µm RVR10018B40B Filtrec · 40 µm RVR10018B40V Filtrec · 40 µm RVR10018B60B Filtrec · 60 µm

Other models in the Replacement Elements series

All 4930 (list page 1/10) →

AD-030-B-125-B 83×193 mm AD-030-B-40-B 83×193 mm AD-030-B-60-B 83×193 mm AD-030-B-80-B 83×193 mm AD-030-E-20-B 83×193 mm AD-033-B-40-B 89×226 mm AD-033-B-60-B 89×226 mm AD-033-B-80-B 89×226 mm AD-033-E-10-B 89×226 mm BL-200-E-10-B 86×62 mm

Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.