Schroeder Industries · BestFit Elements · inline line

KZ5 filter element: specifications & equivalents

Q: What are the dimensions of the KZ5 filter element?

The published envelope is 99 mm OD × 231 mm length with a 41 mm inside diameter (3.898 × 9.094 in × 1.614 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does KZ5 use?

This element is rated 5 µm (nominal class) — 6.3 µm at β(c) ≥ 1000 (99.9% efficiency). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The KZ5 is a Schroeder Industries inline-line hydraulic filter element, built with excellement® z-media® (synthetic) media, sized 99 × 231 mm OD × length (ID 41 mm), rated at 5 µm class (6.3 µm at β(c) ≥ 1000 (99.9% efficiency)). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 99 × 231 mm

Inside diameter 41 mm

Filtration rating 5 µm nom.

Beta rating 6.3 µm at β(c) ≥ 1000 (99.9% efficiency)

Media Excellement® Z-Media® (Synthetic)

Collapse / burst 10.3 bar

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.

Dimensions, ratings and seal compound are taken from the Schroeder Industries online catalog. The nominal µm rating and the β200 absolute rating use different conventions — match the existing media grade before substituting; verify against the current Schroeder data sheet before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	Excellement® Z-Media® (Synthetic)
Filtration rating	5 µm
Rating basis	nominal
Beta ratio	6.3 µm at β(c) ≥ 1000 (99.9% efficiency)
Outside diameter OD	99 mm
Inside diameter ID	41 mm
Length	231 mm
End caps	open-ended cartridge element
Collapse / burst pressure	10.3 bar
Integral bypass valve	none (housing/valve-dependent)
Seal material	Nitrile (Buna-N)
Operating temperature	-29 to 107 °C
Mass	820 g
Source catalog	Schroeder Industries: Schroeder Industries online catalog (catalog.schroederindustries.com)
Last verified	2026-09-28

Sources: Schroeder Industries — Schroeder Industries online catalog (catalog.schroederindustries.com) — accessed 2026-09-28.

Schroeder Industries® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Schroeder Industries distributor.

Dimensions & series range

Outside diameter	99 mm (3.898 in)
Inside diameter	41 mm (1.614 in)
Overall length	231 mm (9.094 in)

All 99×231 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 1HF41H6SLA000P page in verification queue	Aftermarket	partial	Schroeder online cross-reference (EPE); envelope match — verify grade and seals.
↔ 2060529 page in verification queue	UFI	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ 2060943 page in verification queue	UFI	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ 2970L06B09 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 2970L06V09 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 30132 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (CIM-TEK); envelope match — verify grade and seals.
↔ 3970GGEB09 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 3KS3GGEB09 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 3KS3GGEV09 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 50250B760 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (WESTERN); envelope match — verify grade and seals.
↔ 50309D05BN page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYCON); envelope match — verify grade and seals.
↔ 6100EAL051N1 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PUROLATOR); envelope match — verify grade and seals.
↔ 6100EAL062N1 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PUROLATOR); envelope match — verify grade and seals.
↔ 818AGC06CB page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 818BGC05CB page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 818BGC05CV page in verification queue	Aftermarket	partial	Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals.
↔ 925779 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ 932669Q page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ 9326842 page in verification queue	UFI	partial	Schroeder online cross-reference (CAN-FLO); envelope match — verify grade and seals.
↔ 9327269 page in verification queue	UFI	partial	Schroeder online cross-reference (PUROLATOR); envelope match — verify grade and seals.
↔ 9327270 page in verification queue	UFI	partial	Schroeder online cross-reference (PUROLATOR); envelope match — verify grade and seals.
↔ 932760Q page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ 934286 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ 934286Q page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ 9700EAL062N1 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (PUROLATOR); envelope match — verify grade and seals.
↔ B31 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (BALDWIN); envelope match — verify grade and seals.
↔ B35S page in verification queue	Aftermarket	partial	Schroeder online cross-reference (BALDWIN); envelope match — verify grade and seals.
↔ BEK906A page in verification queue	Aftermarket	partial	Schroeder online cross-reference (BEHRINGER); envelope match — verify grade and seals.
↔ C925779 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (COMMERCIAL); envelope match — verify grade and seals.
↔ DE4051B3C05 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (DENISON); envelope match — verify grade and seals.
↔ DTHF498UM page in verification queue	Aftermarket	partial	Schroeder online cross-reference (DONALDSON); envelope match — verify grade and seals.
↔ E4051B3C05 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (WESTERN); envelope match — verify grade and seals.
↔ FD650G06A page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FRAM); envelope match — verify grade and seals.
↔ FPE2005G page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FILTRATION PRODUCTS); envelope match — verify grade and seals.
↔ FPE2505G page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FILTRATION PRODUCTS); envelope match — verify grade and seals.
↔ H9709MCBL page in verification queue	Aftermarket	partial	Schroeder online cross-reference (POROUS MEDIA/FILTERSOFT); envelope match — verify grade and seals.
↔ H9709MCVL page in verification queue	Aftermarket	partial	Schroeder online cross-reference (POROUS MEDIA/FILTERSOFT); envelope match — verify grade and seals.
↔ HC9700FCN9H	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9700FCN9Z	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9700FDN9H page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9700FDN9Z page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9700FKN9H	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9700FUN9H page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9700FUN9Z page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9700FXN9H page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9700FXN9Z page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9720FKN9H page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HC9735FKN9H page in verification queue	Pall	partial	Schroeder online cross-reference (PALL); envelope match — verify grade and seals.
↔ HF0733100 page in verification queue	Fleetguard	partial	Schroeder online cross-reference (FLEETGUARD); envelope match — verify grade and seals.
↔ HF30089	Fleetguard	partial	Fleetguard's online catalog lists KZ5 as an interchange for HF30089. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ HF4050HFB page in verification queue	Fleetguard	partial	Schroeder online cross-reference (PTI); envelope match — verify grade and seals.
↔ HF4070HFB page in verification queue	Fleetguard	partial	Schroeder online cross-reference (PTI); envelope match — verify grade and seals.
↔ HF4070HFV page in verification queue	Fleetguard	partial	Schroeder online cross-reference (PTI); envelope match — verify grade and seals.
↔ HF416B page in verification queue	Fleetguard	partial	Schroeder online cross-reference (NORCO); envelope match — verify grade and seals.
↔ HF416N page in verification queue	Fleetguard	partial	Schroeder online cross-reference (NORCO); envelope match — verify grade and seals.
↔ HF41L5VQ	Parker	partial	Parker ParFit interchange — Schroeder KZ5 replaced by Parker HF41L5VQ. Envelope match; verify grade and seals.
↔ HF4L10VQ page in verification queue	Fleetguard	partial	Schroeder online cross-reference (PARKER); envelope match — verify grade and seals.
↔ HF7332	Fleetguard	partial	Schroeder online cross-reference (FLEETGUARD); envelope match — verify grade and seals.
↔ HK005BN page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYCON); envelope match — verify grade and seals.
↔ HK005BN3 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ HK005BN4HC page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals.
↔ HK005BNV page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HYCON); envelope match — verify grade and seals.
↔ HPKL93M page in verification queue	Aftermarket	partial	Schroeder online cross-reference (MP FILTRI); envelope match — verify grade and seals.
↔ HPKL96MB page in verification queue	Aftermarket	partial	Schroeder online cross-reference (HY-PRO); envelope match — verify grade and seals.
↔ HYU329 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ MP2095 page in verification queue	MP Filtri	partial	Schroeder online cross-reference (MP FILTRI); envelope match — verify grade and seals.
↔ P0390933U7B page in verification queue	Donaldson	partial	Schroeder online cross-reference (FLUITEK); envelope match — verify grade and seals.
↔ P169344 page in verification queue	Donaldson	partial	Schroeder online cross-reference (DONALDSON); envelope match — verify grade and seals.
↔ P174623 page in verification queue	Donaldson	partial	Schroeder online cross-reference (DONALDSON); envelope match — verify grade and seals.
↔ P550051 page in verification queue	Donaldson	partial	Schroeder online cross-reference (DONALDSON); envelope match — verify grade and seals.
↔ P566271	Donaldson	partial	Schroeder online cross-reference (DONALDSON); envelope match — verify grade and seals.
↔ PLU3811000 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ PLU3811000V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ PT8370-MPG	Baldwin Filters	partial	Baldwin's Form 561 Number-Finder cross-reference lists KZ5 (SCHROEDER) as replaced by Baldwin PT8370-MPG. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting.
↔ RF4H0906A page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FAIREY ARLON); envelope match — verify grade and seals.
↔ RKH0906A page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FAIREY ARLON); envelope match — verify grade and seals.
↔ RKH0906H page in verification queue	Aftermarket	partial	Schroeder online cross-reference (FAIREY ARLON); envelope match — verify grade and seals.
↔ SCU329 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ SCU329V page in verification queue	Aftermarket	partial	Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals.
↔ TTK96B page in verification queue	Aftermarket	partial	Schroeder online cross-reference (TODD TECHNOLOGIES INC); envelope match — verify grade and seals.
↔ V4051B3C05 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (VICKERS); envelope match — verify grade and seals.
↔ V4051B3V05 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (VICKERS); envelope match — verify grade and seals.
↔ V4051V3C05	Eaton / Internormen	partial	Schroeder online cross-reference (VICKERS); envelope match — verify grade and seals.
↔ V4051V3V05 page in verification queue	Aftermarket	partial	Schroeder online cross-reference (VICKERS); envelope match — verify grade and seals.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

How the KZ5 model number is decoded

KZ5Schroeder BestFit filter element part number of the K housing-size family.
Excellement® Z-Media® (Synthetic)Filter media execution.
5 µmNominal filter rating as printed in the Schroeder catalog.
β≥1000Absolute rating: 6.3 µm particle size at β(c) ≥ 1000, 99.9% efficiency.
99 mmOuter diameter.
41 mmInner diameter.
231 mmElement height.
10.3 barElement collapse pressure rating.
Nitrile (Buna-N)Seal compound.

Typical equipment & applications

Replacement element for Schroeder hydraulic and lube filter housings
Industrial and mobile hydraulic filtration

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
Fine 5 µm media loads faster and runs at a higher cold Δp than coarser grades — only downgrade cleanliness targets if the system ISO 4406 code allows it.
End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.

Frequently asked questions

What are the dimensions of the KZ5 filter element?

The published envelope is 99 mm OD × 231 mm length with a 41 mm inside diameter (3.898 × 9.094 in × 1.614 in ID). Confirm against the housing drawing before ordering.

What micron rating does KZ5 use?

This element is rated 5 µm (nominal class) — 6.3 µm at β(c) ≥ 1000 (99.9% efficiency). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the KZ5 filter element?

84 partial match(es) requiring parameter review

How do I read the KZ5 part number?

See the designation decoder above: each segment of KZ5 encodes size, line type, filtration grade and media/collapse execution.

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

How often should a hydraulic return-line element be replaced?

Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.

Same-envelope elements from other brands

View full interchange →

These 86 catalog element(s) share the 99×231 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

BRE-10 Schroeder Industries · 10 µm BRE-25 Schroeder Industries · 25 µm BRE-3 Schroeder Industries · 3 µm BRE-Z10 Schroeder Industries · 10 µm BRE-Z5 Schroeder Industries · 5 µm K10 Schroeder Industries · 10 µm K10C Schroeder Industries · 10 µm K10H Schroeder Industries · 10 µm K25 Schroeder Industries · 25 µm K25C Schroeder Industries · 25 µm

Other models in the BestFit Elements series

All 1082 →

10DVZ1 74×249 mm · 1 µm 10DVZ10 74×249 mm · 10 µm 10DVZ10V 74×249 mm · 10 µm 10DVZ25 74×249 mm · 25 µm 10DVZ3 74×249 mm · 3 µm 10DVZ5 74×249 mm · 5 µm 13HAS10 91×328 mm · 10 µm 13HASX10 91×328 mm · 10 µm 13HZ10 91×328 mm · 10 µm 13HZ10V 91×328 mm · 10 µm

Reviewed & verified by the ElementRef engineering desk against Schroeder Industries on 2026-09-28. Read our editorial & correction policy.