ElementRef

Fleetguard · HF Hydraulic · inline line

HF29150 filter element: specifications & equivalents

The HF29150 is a Fleetguard inline-line hydraulic filter element, built with microglass media, sized 94.5 × 198 mm OD × length (ID 43.5 mm), rated at 19 µm absolute (19 µm at β75(c); 28 µm at β200(c); 30 µm at β1000(c) per ISO 16889). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 94.5 × 198 mm
Inside diameter 43.5 mm
Filtration rating 19 µm abs.
Beta rating 19 µm at β75(c); 28 µm at β200(c); 30 µm at β1000(c) per ISO 16889
Media Microglass
Collapse / burst 10 bar
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.

Specifications and cross-references are taken from the Fleetguard online catalog API. Where both TWA and Beta ratings are published the conventions differ — verify cleanliness targets, collapse rating and seal configuration against the current Fleetguard data sheet before ordering.

Specification table

ParameterValue
Filter type inline line
Media Microglass
Filtration rating 19 µm
Rating basis absolute
Beta ratio 19 µm at β75(c); 28 µm at β200(c); 30 µm at β1000(c) per ISO 16889
Outside diameter OD 94.5 mm
Inside diameter ID 43.5 mm
Length 198 mm
End caps open-ended cartridge element
Rated flow 100 L/min
Collapse / burst pressure 10 bar
Integral bypass valve none (housing/valve-dependent)
Manufacturer part no. HF29150
Source catalog Cummins Filtration / Fleetguard: Fleetguard online product catalog (fleetguard.com)
Last verified2026-09-28

Sources: Cummins Filtration / Fleetguard — Fleetguard online product catalog (fleetguard.com) — accessed 2026-09-28.

Fleetguard® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Fleetguard distributor.

Dimensions & series range

Outside diameter94.5 mm (3.720 in)
Inside diameter43.5 mm (1.713 in)
Overall length198 mm (7.795 in)

Cross references & equivalents

Equivalent modelBrandMatch levelNote
↔ 631B12419UHL2
page in verification queue
AftermarketpartialFleetguard's online catalog lists 631B12419UHL2 as an interchange for HF29150. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ M5402MK
page in verification queue
AftermarketpartialFleetguard's online catalog lists M5402MK as an interchange for HF29150. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

How the HF29150 model number is decoded

  • HF29150Fleetguard HF-series hydraulic cartridge element part number.
  • 198 mmOverall height.
  • 94.5 mmLargest outside diameter.
  • 43.5 mmLargest end inside diameter.
  • 19 µm at β75(c); 28 µm at β200(c); 30 µm at β1000(c) per ISO 16889Published efficiency ratings.

Typical equipment & applications

  • Construction, agricultural and industrial hydraulic circuits
  • Mobile-equipment hydraulic return and pressure lines

Selection pitfalls — read before you substitute

  • “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
  • Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
  • End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.

Frequently asked questions

What are the dimensions of the HF29150 filter element?
The published envelope is 94.5 mm OD × 198 mm length with a 43.5 mm inside diameter (3.720 × 7.795 in × 1.713 in ID). Confirm against the housing drawing before ordering.
What micron rating does HF29150 use?
This element is rated 19 µm absolute — 19 µm at β75(c); 28 µm at β200(c); 30 µm at β1000(c) per ISO 16889. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the HF29150 filter element?
2 partial match(es) requiring parameter review
How do I read the HF29150 part number?
See the designation decoder above: each segment of HF29150 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.

Other models in the HF Hydraulic series

All 2621 →
HF28084 HF28086 HF28088 HF28201 HF28202 97×247 mm HF28652 HF28658 95×193 mm HF28660 HF28662 HF28667

Reviewed & verified by the ElementRef engineering desk against Cummins Filtration / Fleetguard on 2026-09-28. Read our editorial & correction policy.