Fleetguard · HF Hydraulic · inline line
HF29148 filter element: specifications & equivalents
The HF29148 is a Fleetguard inline-line hydraulic filter element, built with wiremesh media. Verify against the current manufacturer data sheet before ordering.
Inside diameter 87 mm
Media Wiremesh
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.
Specifications and cross-references are taken from the Fleetguard online catalog API. Where both TWA and Beta ratings are published the conventions differ — verify cleanliness targets, collapse rating and seal configuration against the current Fleetguard data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | Wiremesh |
| Outside diameter OD | 150 mm |
| Inside diameter ID | 87 mm |
| End caps | open-ended cartridge element |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | HF29148 |
| Source catalog | Cummins Filtration / Fleetguard: Fleetguard online product catalog (fleetguard.com) |
| Last verified | 2026-09-28 |
Sources: Cummins Filtration / Fleetguard — Fleetguard online product catalog (fleetguard.com) — accessed 2026-09-28.
Fleetguard® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Fleetguard distributor.
Dimensions & series range
| Outside diameter | 150 mm (5.906 in) |
| Inside diameter | 87 mm (3.425 in) |
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 95081 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 95081 as an interchange for HF29148. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ FH3006 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists FH3006 as an interchange for HF29148. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ H2713 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists H2713 as an interchange for HF29148. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HD155 | MANN-FILTER | partial | MANN-FILTER's online catalog lists HF29148 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for HD155. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HY90296 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists HY90296 as an interchange for HF29148. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ KRJ10590 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists KRJ10590 as an interchange for HF29148. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ KTJ1081 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists KTJ1081 as an interchange for HF29148. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ MMJ80050 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists MMJ80050 as an interchange for HF29148. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT23592 | Baldwin Filters | partial | Fleetguard's online catalog lists PT23592 as an interchange for HF29148. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SFH0590 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists SFH0590 as an interchange for HF29148. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SH60241 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists SH60241 as an interchange for HF29148. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the HF29148 model number is decoded
- HF29148Fleetguard HF-series hydraulic cartridge element part number.
- 150 mmLargest outside diameter.
- 87 mmLargest end inside diameter.
Typical equipment & applications
- Construction, agricultural and industrial hydraulic circuits
- Mobile-equipment hydraulic return and pressure lines
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What replaces the HF29148 filter element?
11 partial match(es) requiring parameter review
How do I read the HF29148 part number?
See the designation decoder above: each segment of HF29148 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Other models in the HF Hydraulic series
All 2621 →Reviewed & verified by the ElementRef engineering desk against Cummins Filtration / Fleetguard on 2026-09-28. Read our editorial & correction policy.