Filtrec · Filtrec elements · inline line

XR1000T25B0 filter element: specifications & equivalents

Q: What are the dimensions of the XR1000T25B0 filter element?

The published envelope is 160 mm OD × 399 mm length with a 90.5 mm inside diameter (6.299 × 15.709 in × 3.563 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does XR1000T25B0 use?

This element is rated 25 µm (nominal class). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The XR1000T25B0 is a Filtrec inline-line hydraulic filter element, built with wire-mesh media, sized 160 × 399 mm OD × length (ID 90.5 mm), rated at 25 µm class. Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 160 × 399 mm

Inside diameter 90.5 mm

Filtration rating 25 µm nom.

Media wire-mesh

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	wire-mesh
Filtration rating	25 µm
Rating basis	nominal
Outside diameter OD	160 mm
Inside diameter ID	90.5 mm
Length	399 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	XR1000T25B0
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	160 mm (6.299 in)
Inside diameter	90.5 mm (3.563 in)
Overall length	399 mm (15.709 in)

All 160×399 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ CFRN1000M25NA page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI CFRN1000M25NA to FILTREC XR1000T25B0 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CRD103RT1 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps SOFIMA HYDRAULICS CRD103RT1 to FILTREC XR1000T25B0 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CU900M25ANP01	MP Filtri	full	Filtrec's official Cross Navigator maps MP FILTRI CU900M25ANP01 to FILTREC XR1000T25B0 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the XR1000T25B0 model number is decoded

T25Filtrec internal media grade code (wire-mesh, 25 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (XR family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the XR1000T25B0 filter element?

The published envelope is 160 mm OD × 399 mm length with a 90.5 mm inside diameter (6.299 × 15.709 in × 3.563 in ID). Confirm against the housing drawing before ordering.

What micron rating does XR1000T25B0 use?

This element is rated 25 µm (nominal class). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the XR1000T25B0 filter element?

3 catalog-confirmed full match(es) (CFRN1000M25NA, CRD103RT1, CU900M25ANP01)

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 78 catalog element(s) share the 160×399 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

K7.1640-66K8 ARGO-HYTOS · 10 µm XR1000C10B0 Filtrec · 10 µm XR1000C10V0 Filtrec · 10 µm XR1000C25B0 Filtrec · 25 µm XR1000C25V0 Filtrec · 25 µm XR1000G03B0 Filtrec · 5 µm XR1000G03B0/ESD Filtrec · 5 µm XR1000G03V0 Filtrec · 5 µm XR1000G06B0 Filtrec · 7 µm XR1000G06B0/ESD Filtrec · 7 µm

Other models in the Filtrec elements series

All 9874 (list page 20/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.