Filtrec · Filtrec elements · inline line
RHR1700G20B1/ESD filter element: specifications & equivalents
The RHR1700G20B1/ESD is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 114 × 792 mm OD × length (ID 68.4 mm), rated at 22 µm absolute (β22(c)≥1000). Verify against the current manufacturer data sheet before ordering.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | glassfiber |
| Filtration rating | 22 µm |
| Rating basis | absolute |
| Beta ratio | β22(c)≥1000 |
| Outside diameter OD | 114 mm |
| Inside diameter ID | 68.4 mm |
| Length | 792 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | RHR1700G20B1/ESD |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 114 mm (4.488 in) |
| Inside diameter | 68.4 mm (2.693 in) |
| Overall length | 792 mm (31.181 in) |
All 114×792 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 1700R020BN4HCB1 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps HYDAC 1700R020BN4HCB1 to FILTREC RHR1700G20B1/ESD as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ 1700R020ONB1 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps HYDAC 1700R020ONB1 to FILTREC RHR1700G20B1/ESD as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ 1700R020ONB1SFREE page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps HYDAC 1700R020ONB1SFREE to FILTREC RHR1700G20B1/ESD as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the RHR1700G20B1/ESD model number is decoded
- G25Filtrec internal media grade code (glassfiber, 22 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (RHR family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Frequently asked questions
What are the dimensions of the RHR1700G20B1/ESD filter element?
What micron rating does RHR1700G20B1/ESD use?
What replaces the RHR1700G20B1/ESD filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Same-envelope elements from other brands
View full interchange →These 127 catalog element(s) share the 114×792 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Filtrec elements series
All 9874 (list page 13/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.