Filtrec · Filtrec elements · inline line

R720T100P filter element: specifications & equivalents

Q: What are the dimensions of the R720T100P filter element?

The published envelope is 106 mm OD × 190 mm length with a 72 mm inside diameter (4.173 × 7.480 in × 2.835 in ID). Confirm against the housing drawing before ordering.

The R720T100P is a Filtrec inline-line hydraulic filter element, built with wire-mesh media, sized 106 × 190 mm OD × length (ID 72 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 106 × 190 mm

Inside diameter 72 mm

Media wire-mesh

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	wire-mesh
Outside diameter OD	106 mm
Inside diameter ID	72 mm
Length	190 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	R720T100P
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	106 mm (4.173 in)
Inside diameter	72 mm (2.835 in)
Overall length	190 mm (7.480 in)

All 106×190 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ FC1091M100BS page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FINN FILTER FC1091M100BS to FILTREC R720T100P as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the R720T100P model number is decoded

T1000Filtrec internal media grade code (wire-mesh).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (R family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Frequently asked questions

What are the dimensions of the R720T100P filter element?

The published envelope is 106 mm OD × 190 mm length with a 72 mm inside diameter (4.173 × 7.480 in × 2.835 in ID). Confirm against the housing drawing before ordering.

What replaces the R720T100P filter element?

1 catalog-confirmed full match(es) (FC1091M100BS)

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 37 catalog element(s) share the 106×190 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

R3.1119-06K1 ARGO-HYTOS · 10 µm R720C10 Filtrec · 10 µm R720C10P Filtrec · 10 µm R720C10P1 Filtrec · 10 µm R720C25 Filtrec · 25 µm R720C25P Filtrec · 25 µm R720C25P1 Filtrec · 25 µm R720G03 Filtrec · 5 µm R720G03P Filtrec · 5 µm R720G06 Filtrec · 7 µm

Other models in the Filtrec elements series

All 9874 (list page 11/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.