Filtrec · Filtrec elements · inline line

R320G25P filter element: specifications & equivalents

Q: What are the dimensions of the R320G25P filter element?

The published envelope is 154.5 mm OD × 457 mm length with a 66.5 mm inside diameter (6.083 × 17.992 in × 2.618 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does R320G25P use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The R320G25P is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 154.5 × 457 mm OD × length (ID 66.5 mm), rated at 22 µm absolute (β22(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 154.5 × 457 mm

Inside diameter 66.5 mm

Filtration rating 22 µm abs.

Beta rating β 22(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	22 µm
Rating basis	absolute
Beta ratio	β22(c)≥1000
Outside diameter OD	154.5 mm
Inside diameter ID	66.5 mm
Length	457 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	R320G25P
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	154.5 mm (6.083 in)
Inside diameter	66.5 mm (2.618 in)
Overall length	457 mm (17.992 in)

All 155×457 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ CF010118A25NA page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI CF010118A25NA to FILTREC R320G25P as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ F60180K25B page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FILTER MART F60180K25B to FILTREC R320G25P as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ F60180K25BX page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FILTER MART F60180K25BX to FILTREC R320G25P as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HP101L1825MB page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps HY-PRO HP101L1825MB to FILTREC R320G25P as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HP102L1825MB page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps HY-PRO HP102L1825MB to FILTREC R320G25P as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ KM60188 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps KAYDON KM60188 to FILTREC R320G25P as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SBF-6000-18Z25B	Schroeder Industries	full	Filtrec's official Cross Navigator maps SCHROEDER SBF600018Z25B to FILTREC R320G25P as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 57729	WIX Filters	partial	Filtrec's official Cross Navigator maps WIX 57729 to FILTREC R320G25P as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (25 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HC0101FCT18H	Pall	partial	Filtrec's official Cross Navigator maps PALL HC0101FCT18H to FILTREC R320G25P as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (25 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HC2618FCT18H	Pall	partial	Filtrec's official Cross Navigator maps PALL HC2618FCT18H to FILTREC R320G25P as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (25 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HF29233	Fleetguard	partial	Fleetguard's online catalog lists R320G25P as an interchange for HF29233. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ PT23508-MPG	Baldwin Filters	partial	Baldwin's Form 561 Number-Finder cross-reference lists R320G25P (FILTREC) as replaced by Baldwin PT23508-MPG. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the R320G25P model number is decoded

G25Filtrec internal media grade code (glassfiber, 22 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (R family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the R320G25P filter element?

The published envelope is 154.5 mm OD × 457 mm length with a 66.5 mm inside diameter (6.083 × 17.992 in × 2.618 in ID). Confirm against the housing drawing before ordering.

What micron rating does R320G25P use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the R320G25P filter element?

7 catalog-confirmed full match(es) (CF010118A25NA, F60180K25B, F60180K25BX…); 5 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 44 catalog element(s) share the 155×457 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

R310C05P Filtrec · 5 µm R310C10 Filtrec · 10 µm R310C10P Filtrec · 10 µm R310C20P Filtrec · 25 µm R310G10P Filtrec · 12 µm R310G25P Filtrec · 22 µm R310GW06P Filtrec · 7 µm R310GW10P Filtrec · 12 µm R310GW25P Filtrec · 22 µm R310P10 Filtrec

Other models in the Filtrec elements series

All 9874 (list page 10/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.