Filtrec · Filtrec elements · inline line

R130G25B filter element: specifications & equivalents

Q: What are the dimensions of the R130G25B filter element?

The published envelope is 70 mm OD × 208.5 mm length with a 40.5 mm inside diameter (2.756 × 8.209 in × 1.594 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does R130G25B use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The R130G25B is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 70 × 208.5 mm OD × length (ID 40.5 mm), rated at 22 µm absolute (β22(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 70 × 208.5 mm

Inside diameter 40.5 mm

Filtration rating 22 µm abs.

Beta rating β 22(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	22 µm
Rating basis	absolute
Beta ratio	β22(c)≥1000
Outside diameter OD	70 mm
Inside diameter ID	40.5 mm
Length	208.5 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	R130G25B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	70 mm (2.756 in)
Inside diameter	40.5 mm (1.594 in)
Overall length	208.5 mm (8.209 in)

All 70×209 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ F12A25M page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI F12A25M to FILTREC R130G25B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ MF1003A25HB	MP Filtri	full	Filtrec's official Cross Navigator maps MP FILTRI MF1003A25HB to FILTREC R130G25B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ MF1003A25HBP01	MP Filtri	full	Filtrec's official Cross Navigator maps MP FILTRI MF1003A25HBP01 to FILTREC R130G25B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ MF1003A25NB	MP Filtri	full	Filtrec's official Cross Navigator maps MP FILTRI MF1003A25NB to FILTREC R130G25B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HD7020	MANN-FILTER	partial	MANN-FILTER's online catalog lists R130G25B (FILTREC) as a comparison number for HD7020. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ P171843	Donaldson	partial	Filtrec's official Cross Navigator maps DONALDSON P171843 to FILTREC R130G25B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (23 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ PT23035-MPG	Baldwin Filters	partial	Baldwin's Form 561 Number-Finder cross-reference lists R130G25B (FILTREC) as replaced by Baldwin PT23035-MPG. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the R130G25B model number is decoded

G25Filtrec internal media grade code (glassfiber, 22 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (R family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the R130G25B filter element?

The published envelope is 70 mm OD × 208.5 mm length with a 40.5 mm inside diameter (2.756 × 8.209 in × 1.594 in ID). Confirm against the housing drawing before ordering.

What micron rating does R130G25B use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the R130G25B filter element?

4 catalog-confirmed full match(es) (F12A25M, MF1003A25HB, MF1003A25HBP01…); 3 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 19 catalog element(s) share the 70×209 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

R130C10B Filtrec · 10 µm R130C10BR Filtrec · 10 µm R130C10BV Filtrec · 10 µm R130C10C Filtrec · 10 µm R130C25B Filtrec · 25 µm R130C25BR Filtrec · 25 µm R130C25BRR Filtrec · 25 µm R130C25BV Filtrec · 25 µm R130C25C Filtrec · 25 µm R130G03BV Filtrec · 5 µm

Other models in the Filtrec elements series

All 9874 (list page 9/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.