Filtrec · Filtrec elements · inline line

R130C10B filter element: specifications & equivalents

Q: What are the dimensions of the R130C10B filter element?

The published envelope is 70 mm OD × 208.5 mm length with a 40.5 mm inside diameter (2.756 × 8.209 in × 1.594 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does R130C10B use?

This element is rated 10 µm (nominal class) — β10(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The R130C10B is a Filtrec inline-line hydraulic filter element, built with cellulose media, sized 70 × 208.5 mm OD × length (ID 40.5 mm), rated at 10 µm class (β10(c)≥2). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 70 × 208.5 mm

Inside diameter 40.5 mm

Filtration rating 10 µm nom.

Beta rating β 10(c)≥2

Media cellulose

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	cellulose
Filtration rating	10 µm
Rating basis	nominal
Beta ratio	β10(c)≥2
Outside diameter OD	70 mm
Inside diameter ID	40.5 mm
Length	208.5 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	R130C10B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	70 mm (2.756 in)
Inside diameter	40.5 mm (1.594 in)
Overall length	208.5 mm (8.209 in)

All 70×209 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ CFDR30P10 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps DOMANGE CFDR30P10 to FILTREC R130C10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ F12P10 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI F12P10 to FILTREC R130C10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ F12P10M page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI F12P10M to FILTREC R130C10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ FRTE100P10S10 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps DUPLOMATIC FRTE100P10S10 to FILTREC R130C10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ FRTE100P10S10N page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps DUPLOMATIC FRTE100P10S10N to FILTREC R130C10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ FXRS6M10 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FBN FXRS6M10 to FILTREC R130C10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ FXRS6M10C page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FBN FXRS6M10C to FILTREC R130C10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ MF1003P10NB	MP Filtri	full	Filtrec's official Cross Navigator maps MP FILTRI MF1003P10NB to FILTREC R130C10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ MF1003P10NBP01	MP Filtri	full	Filtrec's official Cross Navigator maps MP FILTRI MF1003P10NBP01 to FILTREC R130C10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ P171840	Donaldson	partial	Filtrec's official Cross Navigator maps DONALDSON P171840 to FILTREC R130C10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (7 vs 10 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ PT9264	Baldwin Filters	partial	Baldwin's Form 561 Number-Finder cross-reference lists R130C10B (FILTREC) as replaced by Baldwin PT9264. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the R130C10B model number is decoded

C10Filtrec internal media grade code (cellulose, 10 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (R family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the R130C10B filter element?

The published envelope is 70 mm OD × 208.5 mm length with a 40.5 mm inside diameter (2.756 × 8.209 in × 1.594 in ID). Confirm against the housing drawing before ordering.

What micron rating does R130C10B use?

This element is rated 10 µm (nominal class) — β10(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the R130C10B filter element?

9 catalog-confirmed full match(es) (CFDR30P10, F12P10, F12P10M…); 2 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 19 catalog element(s) share the 70×209 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

R130C10BR Filtrec · 10 µm R130C10BV Filtrec · 10 µm R130C10C Filtrec · 10 µm R130C25B Filtrec · 25 µm R130C25BR Filtrec · 25 µm R130C25BRR Filtrec · 25 µm R130C25BV Filtrec · 25 µm R130C25C Filtrec · 25 µm R130G03BV Filtrec · 5 µm R130G06BV Filtrec · 7 µm

Other models in the Filtrec elements series

All 9874 (list page 9/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.