Filtrec · Filtrec elements · inline line

D652G25A filter element: specifications & equivalents

Q: What are the dimensions of the D652G25A filter element?

The published envelope is 99 mm OD × 710 mm length with a 42 mm inside diameter (3.898 × 27.953 in × 1.654 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does D652G25A use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The D652G25A is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 99 × 710 mm OD × length (ID 42 mm), rated at 22 µm absolute (β22(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 99 × 710 mm

Inside diameter 42 mm

Filtration rating 22 µm abs.

Beta rating β 22(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	22 µm
Rating basis	absolute
Beta ratio	β22(c)≥1000
Outside diameter OD	99 mm
Inside diameter ID	42 mm
Length	710 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	D652G25A
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	99 mm (3.898 in)
Inside diameter	42 mm (1.654 in)
Overall length	710 mm (27.953 in)

All 99×710 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ CF9703A25NA page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI CF9703A25NA to FILTREC D652G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ F970027K25B page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FILTER MART F970027K25B to FILTREC D652G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ KKKZ25 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps SCHROEDER KKKZ25 to FILTREC D652G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ P174268 page in verification queue	Donaldson	full	Filtrec's official Cross Navigator maps DONALDSON P174268 to FILTREC D652G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ QHKA25B27 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps QUALITY FILTRATION QHKA25B27 to FILTREC D652G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ V4051B7C20	Eaton / Internormen	full	Filtrec's official Cross Navigator maps VICKERS V4051B7C20 to FILTREC D652G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 27KZ25	Schroeder Industries	partial	Filtrec's official Cross Navigator maps SCHROEDER 27KZ25 to FILTREC D652G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (25 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HC9700FCT27H	Pall	partial	Filtrec's official Cross Navigator maps PALL HC9700FCT27H to FILTREC D652G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (25 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HF3253A25ANP01	MP Filtri	partial	Filtrec's official Cross Navigator maps MP FILTRI HF3253A25ANP01 to FILTREC D652G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (25 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the D652G25A model number is decoded

G25Filtrec internal media grade code (glassfiber, 22 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (D family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the D652G25A filter element?

The published envelope is 99 mm OD × 710 mm length with a 42 mm inside diameter (3.898 × 27.953 in × 1.654 in ID). Confirm against the housing drawing before ordering.

What micron rating does D652G25A use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the D652G25A filter element?

6 catalog-confirmed full match(es) (CF9703A25NA, F970027K25B, KKKZ25…); 3 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 20 catalog element(s) share the 99×710 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

D652C03A Filtrec · 3 µm D652C10A Filtrec · 10 µm D652C10AV Filtrec · 10 µm D652C25A Filtrec · 25 µm D652C25AV Filtrec · 25 µm D652G03A Filtrec · 5 µm D652G03AV Filtrec · 5 µm D652G03AV/ESD Filtrec · 5 µm D652G06A Filtrec · 7 µm D652G06AV Filtrec · 7 µm

Other models in the Filtrec elements series

All 9874 (list page 4/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.