Filtrec · Filtrec elements · inline line

D650T60A filter element: specifications & equivalents

Q: What are the dimensions of the D650T60A filter element?

The published envelope is 99 mm OD × 235 mm length with a 42 mm inside diameter (3.898 × 9.252 in × 1.654 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does D650T60A use?

This element is rated 60 µm (nominal class). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The D650T60A is a Filtrec inline-line hydraulic filter element, built with wire-mesh media, sized 99 × 235 mm OD × length (ID 42 mm), rated at 60 µm class. Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 99 × 235 mm

Inside diameter 42 mm

Filtration rating 60 µm nom.

Media wire-mesh

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	wire-mesh
Filtration rating	60 µm
Rating basis	nominal
Outside diameter OD	99 mm
Inside diameter ID	42 mm
Length	235 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	D650T60A
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	99 mm (3.898 in)
Inside diameter	42 mm (1.654 in)
Overall length	235 mm (9.252 in)

All 99×235 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ KM60	Schroeder Industries	full	Filtrec's official Cross Navigator maps SCHROEDER KM60 to FILTREC D650T60A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 5.03.09 D 74 W	HYDAC	partial	Filtrec's official Cross Navigator maps HYDAC 50309D74W to FILTREC D650T60A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (74 vs 60 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HF8023	Fleetguard	partial	Fleetguard's online catalog lists D650T60A as an interchange for HF8023. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ PT9511	Baldwin Filters	partial	Baldwin's Form 561 Number-Finder cross-reference lists D650T60A (FILTREC) as replaced by Baldwin PT9511. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the D650T60A model number is decoded

T60Filtrec internal media grade code (wire-mesh, 60 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (D family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the D650T60A filter element?

The published envelope is 99 mm OD × 235 mm length with a 42 mm inside diameter (3.898 × 9.252 in × 1.654 in ID). Confirm against the housing drawing before ordering.

What micron rating does D650T60A use?

This element is rated 60 µm (nominal class). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the D650T60A filter element?

1 catalog-confirmed full match(es) (KM60); 3 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 36 catalog element(s) share the 99×235 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

D650C03A Filtrec · 3 µm D650C03AV Filtrec · 3 µm D650C10A Filtrec · 10 µm D650C10AV Filtrec · 10 µm D650C25A Filtrec · 25 µm D650C25AV Filtrec · 25 µm D650CW10A Filtrec D650G01AV Filtrec · 4 µm D650G01AV/ESD Filtrec · 4 µm D650G03A Filtrec · 5 µm

Other models in the Filtrec elements series

All 9874 (list page 4/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.