Filtrec · Filtrec elements · inline line

D650G10AV filter element: specifications & equivalents

Q: What are the dimensions of the D650G10AV filter element?

The published envelope is 99 mm OD × 235 mm length with a 42 mm inside diameter (3.898 × 9.252 in × 1.654 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does D650G10AV use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The D650G10AV is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 99 × 235 mm OD × length (ID 42 mm), rated at 12 µm absolute (β12(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 99 × 235 mm

Inside diameter 42 mm

Filtration rating 12 µm abs.

Beta rating β 12(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	12 µm
Rating basis	absolute
Beta ratio	β12(c)≥1000
Outside diameter OD	99 mm
Inside diameter ID	42 mm
Length	235 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	D650G10AV
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	99 mm (3.898 in)
Inside diameter	42 mm (1.654 in)
Overall length	235 mm (9.252 in)

All 99×235 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 50309D10BNV page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps HYDAC 50309D10BNV to FILTREC D650G10AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HC9700FCS9Z	Pall	full	Filtrec's official Cross Navigator maps PALL HC9700FCS9Z to FILTREC D650G10AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ P174624 page in verification queue	Donaldson	full	Filtrec's official Cross Navigator maps DONALDSON P174624 to FILTREC D650G10AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ P566272	Donaldson	full	Filtrec's official Cross Navigator maps DONALDSON P566272 to FILTREC D650G10AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ V4051V3C10	Eaton / Internormen	full	Filtrec's official Cross Navigator maps VICKERS V4051V3C10 to FILTREC D650G10AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 57841	WIX Filters	partial	Filtrec's official Cross Navigator maps WIX 57841 to FILTREC D650G10AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (10 vs 12 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HF29223	Fleetguard	partial	Fleetguard's online catalog lists D650G10AV as an interchange for HF29223. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ KZ10V	Schroeder Industries	partial	Filtrec's official Cross Navigator maps SCHROEDER KZ10V to FILTREC D650G10AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (10 vs 12 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ PT23514-MPG	Baldwin Filters	partial	Baldwin's Form 561 Number-Finder cross-reference lists D650G10AV (FILTREC) as replaced by Baldwin PT23514-MPG. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the D650G10AV model number is decoded

G10Filtrec internal media grade code (glassfiber, 12 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (D family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the D650G10AV filter element?

The published envelope is 99 mm OD × 235 mm length with a 42 mm inside diameter (3.898 × 9.252 in × 1.654 in ID). Confirm against the housing drawing before ordering.

What micron rating does D650G10AV use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the D650G10AV filter element?

5 catalog-confirmed full match(es) (50309D10BNV, HC9700FCS9Z, P174624…); 4 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 36 catalog element(s) share the 99×235 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

D650C03A Filtrec · 3 µm D650C03AV Filtrec · 3 µm D650C10A Filtrec · 10 µm D650C10AV Filtrec · 10 µm D650C25A Filtrec · 25 µm D650C25AV Filtrec · 25 µm D650CW10A Filtrec D650G01AV Filtrec · 4 µm D650G01AV/ESD Filtrec · 4 µm D650G03A Filtrec · 5 µm

Other models in the Filtrec elements series

All 9874 (list page 4/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.