Filtrec · Filtrec elements · inline line

D624G25 filter element: specifications & equivalents

Q: What are the dimensions of the D624G25 filter element?

The published envelope is 96 mm OD × 986 mm length with a 56.5 mm inside diameter (3.780 × 38.819 in × 2.224 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does D624G25 use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The D624G25 is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 96 × 986 mm OD × length (ID 56.5 mm), rated at 22 µm absolute (β22(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 96 × 986 mm

Inside diameter 56.5 mm

Filtration rating 22 µm abs.

Beta rating β 22(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	22 µm
Rating basis	absolute
Beta ratio	β22(c)≥1000
Outside diameter OD	96 mm
Inside diameter ID	56.5 mm
Length	986 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	D624G25
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	96 mm (3.780 in)
Inside diameter	56.5 mm (2.224 in)
Overall length	986 mm (38.819 in)

All 96×986 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 11039D25BN page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps HYDAC 11039D25BN to FILTREC D624G25 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CF9404A25NA page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI CF9404A25NA to FILTREC D624G25 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ F940039K25B page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FILTER MART F940039K25B to FILTREC D624G25 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HF7063	Fleetguard	full	Filtrec's official Cross Navigator maps FLEETGUARD HF7063 to FILTREC D624G25 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ QH9400A25B39 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps QUALITY FILTRATION QH9400A25B39 to FILTREC D624G25 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SP-250-E-20-B	STAUFF	full	Filtrec's official Cross Navigator maps STAUFF SP250E20B to FILTREC D624G25 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HC9400FCT39H	Pall	partial	Filtrec's official Cross Navigator maps PALL HC9400FCT39H to FILTREC D624G25 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (25 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HF30833	Fleetguard	partial	Fleetguard's online catalog lists D624G25 as an interchange for HF30833. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ SBF-9400-39Z25B	Schroeder Industries	partial	Schroeder online cross-reference (FILTREC); envelope match — verify grade and seals.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the D624G25 model number is decoded

G25Filtrec internal media grade code (glassfiber, 22 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (D family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the D624G25 filter element?

The published envelope is 96 mm OD × 986 mm length with a 56.5 mm inside diameter (3.780 × 38.819 in × 2.224 in ID). Confirm against the housing drawing before ordering.

What micron rating does D624G25 use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the D624G25 filter element?

6 catalog-confirmed full match(es) (11039D25BN, CF9404A25NA, F940039K25B…); 3 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 18 catalog element(s) share the 96×986 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

D624C10 Filtrec · 10 µm D624C10V Filtrec · 10 µm D624G01 Filtrec · 4 µm D624G01/ESD Filtrec · 4 µm D624G01V Filtrec · 4 µm D624G01V/ESD Filtrec · 4 µm D624G03 Filtrec · 5 µm D624G03V Filtrec · 5 µm D624G03V/ESD Filtrec · 5 µm D624G06 Filtrec · 7 µm

Other models in the Filtrec elements series

All 9874 (list page 4/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.