Filtrec · Filtrec elements · inline line

D615G25V filter element: specifications & equivalents

Q: What are the dimensions of the D615G25V filter element?

The published envelope is 96 mm OD × 653 mm length with a 56.5 mm inside diameter (3.780 × 25.709 in × 2.224 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does D615G25V use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The D615G25V is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 96 × 653 mm OD × length (ID 56.5 mm), rated at 22 µm absolute (β22(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 96 × 653 mm

Inside diameter 56.5 mm

Filtration rating 22 µm abs.

Beta rating β 22(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	22 µm
Rating basis	absolute
Beta ratio	β22(c)≥1000
Outside diameter OD	96 mm
Inside diameter ID	56.5 mm
Length	653 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	D615G25V
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	96 mm (3.780 in)
Inside diameter	56.5 mm (2.224 in)
Overall length	653 mm (25.709 in)

All 96×653 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 933221Q	Parker	full	Filtrec's official Cross Navigator maps PARKER 933221Q to FILTREC D615G25V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CF8904A25NV page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI CF8904A25NV to FILTREC D615G25V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ F890026K25V page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FILTER MART F890026K25V to FILTREC D615G25V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ QH8900A25V26 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps QUALITY FILTRATION QH8900A25V26 to FILTREC D615G25V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SBF-8900-26Z25V	Schroeder Industries	full	Filtrec's official Cross Navigator maps SCHROEDER SBF890026Z25V to FILTREC D615G25V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HC8900FCT26Z	Pall	partial	Filtrec's official Cross Navigator maps PALL HC8900FCT26Z to FILTREC D615G25V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (25 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the D615G25V model number is decoded

G25Filtrec internal media grade code (glassfiber, 22 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (D family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the D615G25V filter element?

The published envelope is 96 mm OD × 653 mm length with a 56.5 mm inside diameter (3.780 × 25.709 in × 2.224 in ID). Confirm against the housing drawing before ordering.

What micron rating does D615G25V use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the D615G25V filter element?

5 catalog-confirmed full match(es) (933221Q, CF8904A25NV, F890026K25V…); 1 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 30 catalog element(s) share the 96×653 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

D615C10 Filtrec · 10 µm D615C10V Filtrec · 10 µm D615C25 Filtrec · 25 µm D615C25V Filtrec · 25 µm D615G01 Filtrec · 4 µm D615G01V/ESD Filtrec · 4 µm D615G03 Filtrec · 5 µm D615G03V Filtrec · 5 µm D615G03V/ESD Filtrec · 5 µm D615G06 Filtrec · 7 µm

Other models in the Filtrec elements series

All 9874 (list page 4/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.