Filtrec · Filtrec elements · inline line

D193G25A filter element: specifications & equivalents

Q: What are the dimensions of the D193G25A filter element?

The published envelope is 86 mm OD × 427 mm length with a 49.5 mm inside diameter (3.386 × 16.811 in × 1.949 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does D193G25A use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The D193G25A is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 86 × 427 mm OD × length (ID 49.5 mm), rated at 22 µm absolute (β22(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 86 × 427 mm

Inside diameter 49.5 mm

Filtration rating 22 µm abs.

Beta rating β 22(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	22 µm
Rating basis	absolute
Beta ratio	β22(c)≥1000
Outside diameter OD	86 mm
Inside diameter ID	49.5 mm
Length	427 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	D193G25A
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	86 mm (3.386 in)
Inside diameter	49.5 mm (1.949 in)
Overall length	427 mm (16.811 in)

All 86×427 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 11716D25BN page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps HYDAC 11716D25BN to FILTREC D193G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ F880016K25B page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FILTER MART F880016K25B to FILTREC D193G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HF30795	Fleetguard	full	Filtrec's official Cross Navigator maps FLEETGUARD HF30795 to FILTREC D193G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HF7132	Fleetguard	full	Filtrec's official Cross Navigator maps FLEETGUARD HF7132 to FILTREC D193G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ P174537 page in verification queue	Donaldson	full	Filtrec's official Cross Navigator maps DONALDSON P174537 to FILTREC D193G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ QH8800A25B16 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps QUALITY FILTRATION QH8800A25B16 to FILTREC D193G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SBF-8800-16Z25B	Schroeder Industries	full	Filtrec's official Cross Navigator maps SCHROEDER SBF880016Z25B to FILTREC D193G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the D193G25A model number is decoded

G25Filtrec internal media grade code (glassfiber, 22 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (D family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the D193G25A filter element?

The published envelope is 86 mm OD × 427 mm length with a 49.5 mm inside diameter (3.386 × 16.811 in × 1.949 in ID). Confirm against the housing drawing before ordering.

What micron rating does D193G25A use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the D193G25A filter element?

7 catalog-confirmed full match(es) (11716D25BN, F880016K25B, HF30795…)

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 22 catalog element(s) share the 86×427 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

D193G03A Filtrec · 5 µm D193G03AV Filtrec · 5 µm D193G06A Filtrec · 7 µm D193G06AV Filtrec · 7 µm D193G10A Filtrec · 12 µm D193G10AV Filtrec · 12 µm D193G25AV Filtrec · 22 µm R424G03 Filtrec · 5 µm R424G03V Filtrec · 5 µm R424G03V/ESD Filtrec · 5 µm

Other models in the Filtrec elements series

All 9874 (list page 4/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.