Donaldson · Hydraulic Catalog · inline line
P566201 filter element: specifications & equivalents
The P566201 is a Donaldson inline-line hydraulic filter element, built with wire mesh media, rated at 8 µm class. Verify against the current manufacturer data sheet before ordering.
OD/ID dimensions, collapse pressure and bypass settings are not printed in the filter-element choice table and are pending extraction from the housing dimension pages. Verify against the current Donaldson data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | Wire Mesh |
| Filtration rating | 8 µm |
| Rating basis | nominal |
| Length | 208 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | P566201 |
| Source catalog | Donaldson Company: Hydraulic Filtration Product Guide (F112100-ENG) |
| Last verified | 2026-09-28 |
Sources: Donaldson Company — Hydraulic Filtration Product Guide (F112100-ENG) — accessed 2026-09-27.
Donaldson® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Donaldson distributor.
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ D112G06AV | Filtrec | partial | Filtrec's official Cross Navigator maps DONALDSON P566201 to FILTREC D112G06AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (8 vs 7 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ HD514/1 | MANN-FILTER | partial | MANN-FILTER's online catalog lists P566201 (DONALDSON) as a comparison number for HD5141. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF30063 | Fleetguard | partial | Fleetguard's online catalog lists P566201 as an interchange for HF30063. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SBF-9020-8Z5B | Schroeder Industries | partial | Schroeder online cross-reference (DONALDSON); envelope match — verify grade and seals. |
| ↔ SBF-9020-8Z5V | Schroeder Industries | partial | Schroeder online cross-reference (DONALDSON); envelope match — verify grade and seals. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Donaldson cross reference chart →
How the P566201 model number is decoded
- P566201Donaldson hydraulic filter element part number per the Hydraulic Filtration Product Guide (F112100-ENG).
- DT Product family: DT .
- Wire MeshFilter media: Wire Mesh.
- 8 μmNominal filtration rating at βx(c) = 2 per ISO 16889.
Typical equipment & applications
- Donaldson DT hydraulic filter housing
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Frequently asked questions
What micron rating does P566201 use?
What replaces the P566201 filter element?
How do I read the P566201 part number?
Other models in the Hydraulic Catalog series
All 360 →Reviewed & verified by the ElementRef engineering desk against Donaldson Company on 2026-09-28. Read our editorial & correction policy.