Donaldson · Hydraulic Catalog · inline line
P171834 filter element: specifications & equivalents
The P171834 is a Donaldson inline-line hydraulic filter element, built with wire mesh media, rated at 60 µm class. Verify against the current manufacturer data sheet before ordering.
OD/ID dimensions, collapse pressure and bypass settings are not printed in the filter-element choice table and are pending extraction from the housing dimension pages. Verify against the current Donaldson data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | Wire Mesh |
| Filtration rating | 60 µm |
| Rating basis | nominal |
| Length | 210 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | P171834 |
| Source catalog | Donaldson Company: Hydraulic Filtration Product Guide (F112100-ENG) |
| Last verified | 2026-09-28 |
Sources: Donaldson Company — Hydraulic Filtration Product Guide (F112100-ENG) — accessed 2026-09-27.
Donaldson® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Donaldson distributor.
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ R130T60B | Filtrec | full | Filtrec's official Cross Navigator maps DONALDSON P171834 to FILTREC R130T60B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HD7035 | MANN-FILTER | partial | MANN-FILTER's online catalog lists P171834 (DONALDSON) as a comparison number for HD7035. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF35208 | Fleetguard | partial | Fleetguard's online catalog lists P171834 as an interchange for HF35208. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT23176 | Baldwin Filters | partial | Baldwin's Form 561 Number-Finder cross-reference lists P171834 (DONALDSON) as replaced by Baldwin PT23176. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Donaldson cross reference chart →
How the P171834 model number is decoded
- P171834Donaldson hydraulic filter element part number per the Hydraulic Filtration Product Guide (F112100-ENG).
- FIKProduct family: FIK.
- Wire MeshFilter media: Wire Mesh.
- 60 μmNominal filtration rating at βx(c) = 2 per ISO 16889.
Typical equipment & applications
- Donaldson FIK hydraulic filter housing
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Frequently asked questions
What micron rating does P171834 use?
What replaces the P171834 filter element?
How do I read the P171834 part number?
Other models in the Hydraulic Catalog series
All 360 →Reviewed & verified by the ElementRef engineering desk against Donaldson Company on 2026-09-28. Read our editorial & correction policy.