Donaldson · Hydraulic Catalog · inline line
P167181 filter element: specifications & equivalents
The P167181 is a Donaldson inline-line hydraulic filter element, built with wire mesh media, rated at 12 µm class. Verify against the current manufacturer data sheet before ordering.
OD/ID dimensions, collapse pressure and bypass settings are not printed in the filter-element choice table and are pending extraction from the housing dimension pages. Verify against the current Donaldson data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | Wire Mesh |
| Filtration rating | 12 µm |
| Rating basis | nominal |
| Length | 113 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | P167181 |
| Source catalog | Donaldson Company: Hydraulic Filtration Product Guide (F112100-ENG) |
| Last verified | 2026-09-28 |
Sources: Donaldson Company — Hydraulic Filtration Product Guide (F112100-ENG) — accessed 2026-09-27.
Donaldson® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Donaldson distributor.
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ D111G10BV | Filtrec | full | Filtrec's official Cross Navigator maps DONALDSON P167181 to FILTREC D111G10BV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ H9054 | Baldwin Filters | partial | Baldwin's Form 561 Number-Finder cross-reference lists P167181 (DONALDSON) as replaced by Baldwin H9054. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HD55/6 | MANN-FILTER | partial | MANN-FILTER's online catalog lists P167181 (DONALDSON) as a comparison number for HD556. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF30204 | Fleetguard | partial | Fleetguard's online catalog lists P167181 as an interchange for HF30204. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SBF-9021-4Z10B | Schroeder Industries | partial | Schroeder online cross-reference (DONALDSON); envelope match — verify grade and seals. |
| ↔ SBF-9021-4Z10V | Schroeder Industries | partial | Schroeder online cross-reference (DONALDSON); envelope match — verify grade and seals. |
| ↔ V3045V1H10 | Eaton / Internormen | partial | Eaton's filtration cross-reference lists P167181 (Donaldson) as an interchange for V3045V1H10. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Donaldson cross reference chart →
How the P167181 model number is decoded
- P167181Donaldson hydraulic filter element part number per the Hydraulic Filtration Product Guide (F112100-ENG).
- DT Product family: DT .
- Wire MeshFilter media: Wire Mesh.
- 12 μmNominal filtration rating at βx(c) = 2 per ISO 16889.
Typical equipment & applications
- Donaldson DT hydraulic filter housing
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Frequently asked questions
What micron rating does P167181 use?
What replaces the P167181 filter element?
How do I read the P167181 part number?
Other models in the Hydraulic Catalog series
All 360 →Reviewed & verified by the ElementRef engineering desk against Donaldson Company on 2026-09-28. Read our editorial & correction policy.