STAUFF · Replacement Elements · inline line

SXX-276-E-03-B-401422 filter element: specifications & equivalents

Q: What are the dimensions of the SXX-276-E-03-B-401422 filter element?

The published envelope is 80 mm OD × 276 mm length with a 32.2 mm inside diameter (3.150 × 10.866 in × 1.268 in ID). Confirm against the housing drawing before ordering.

The SXX-276-E-03-B-401422 is a STAUFF inline-line hydraulic filter element, sized 80 × 276 mm OD × length (ID 32.2 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 80 × 276 mm

Inside diameter 32.2 mm

Line type inline

Partially verified. Fit and grade trace to an official interchange document; dimensional values are compiled from 0 aftermarket listing(s) and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.

Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.

Specification table

Parameter	Value
Filter type	inline line
Outside diameter OD	80 mm
Inside diameter ID	32.2 mm
Length	276 mm
Integral bypass valve	none (housing/valve-dependent)
Source catalog	STAUFF: STAUFF Filter Interchange online database (filterinterchange.com)
Last verified	2026-09-28

Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.

STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	80 mm (3.150 in)
Inside diameter	32.2 mm (1.268 in)
Overall length	276 mm (10.866 in)

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 1267052 page in verification queue	UFI	partial	STAUFF Filter Interchange lists 1267052 (HYDAC) as replaced by SXX-276-E-03-B-401422. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 940166Q page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 940166Q (PARKER) as replaced by SXX-276-E-03-B-401422. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HC0008FHP11H page in verification queue	Pall	partial	STAUFF Filter Interchange lists HC 0008FHP11H (PALL) as replaced by SXX-276-E-03-B-401422. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HC0008FKP11H page in verification queue	Pall	partial	STAUFF Filter Interchange lists HC 0008FKP11H (PALL) as replaced by SXX-276-E-03-B-401422. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HC0008FRP11H page in verification queue	Pall	partial	STAUFF Filter Interchange lists HC 0008FRP11H (PALL) as replaced by SXX-276-E-03-B-401422. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HPQ974763MB page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists HPQ 97476-3MB (HY-PRO) as replaced by SXX-276-E-03-B-401422. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ SN200176 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists SN200.176 (ARBURG) as replaced by SXX-276-E-03-B-401422. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: STAUFF cross reference chart →

How the SXX-276-E-03-B-401422 model number is decoded

SXX-276-E-03-B-401422STAUFF replacement element part number per the STAUFF Filter Interchange database.

Typical equipment & applications

Replacement element for OEM hydraulic filter housings

Frequently asked questions

What are the dimensions of the SXX-276-E-03-B-401422 filter element?

The published envelope is 80 mm OD × 276 mm length with a 32.2 mm inside diameter (3.150 × 10.866 in × 1.268 in ID). Confirm against the housing drawing before ordering.

What replaces the SXX-276-E-03-B-401422 filter element?

7 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Other models in the Replacement Elements series

All 4930 (list page 10/10) →

AD-030-B-125-B 83×193 mm AD-030-B-40-B 83×193 mm AD-030-B-60-B 83×193 mm AD-030-B-80-B 83×193 mm AD-030-E-20-B 83×193 mm AD-033-B-40-B 89×226 mm AD-033-B-60-B 89×226 mm AD-033-B-80-B 89×226 mm AD-033-E-10-B 89×226 mm BL-200-E-10-B 86×62 mm

Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.