STAUFF · Replacement Elements · inline line
SP-300-E-20-V filter element: specifications & equivalents
The SP-300-E-20-V is a STAUFF inline-line hydraulic filter element, sized 152 × 978 mm OD × length (ID 105 mm). Verify against the current manufacturer data sheet before ordering.
Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 152 mm |
| Inside diameter ID | 105 mm |
| Length | 978 mm |
| End caps | open-ended cartridge element |
| Integral bypass valve | none (housing/valve-dependent) |
| Source catalog | STAUFF: STAUFF Filter Interchange online database (filterinterchange.com) |
| Last verified | 2026-09-28 |
Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.
STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 152 mm (5.984 in) |
| Inside diameter | 105 mm (4.134 in) |
| Overall length | 978 mm (38.504 in) |
All 152×978 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 168300XH20XLS000V page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists 16.8300 / X H20XL-S00-0-V (EPE / Bosch-Rexroth Filtration) as replaced by SP-300-E-20-V. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ 3830DGMV39 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists 3830DGMV39 (ST-FILTER) as replaced by SP-300-E-20-V. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
| ↔ 39QZ25V | Schroeder Industries | partial | Schroeder online cross-reference (STAUFF); envelope match — verify grade and seals. |
| ↔ HF7411 | Fleetguard | partial | Fleetguard's online catalog lists SP300E20V as an interchange for HF7411. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SBF-8300-39Z25V | Schroeder Industries | partial | Schroeder online cross-reference (STAUFF); envelope match — verify grade and seals. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: STAUFF cross reference chart →
How the SP-300-E-20-V model number is decoded
- SP-300-E-20-VSTAUFF replacement element part number per the STAUFF Filter Interchange database.
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the SP-300-E-20-V filter element?
What replaces the SP-300-E-20-V filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Same-envelope elements from other brands
View full interchange →These 30 catalog element(s) share the 152×978 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Replacement Elements series
All 4930 (list page 10/10) →Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.