STAUFF · Replacement Elements · inline line
SP-075-E-10-B filter element: specifications & equivalents
The SP-075-E-10-B is a STAUFF inline-line hydraulic filter element, sized 70 × 118 mm OD × length (ID 33.5 mm). Verify against the current manufacturer data sheet before ordering.
Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 70 mm |
| Inside diameter ID | 33.5 mm |
| Length | 118 mm |
| End caps | open-ended cartridge element |
| Integral bypass valve | none (housing/valve-dependent) |
| Source catalog | STAUFF: STAUFF Filter Interchange online database (filterinterchange.com) |
| Last verified | 2026-09-28 |
Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.
STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 70 mm (2.756 in) |
| Inside diameter | 33.5 mm (1.319 in) |
| Overall length | 118 mm (4.646 in) |
All 70×118 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ D180G10A | Filtrec | full | Filtrec's official Cross Navigator maps STAUFF SP075E10B to FILTREC D180G10A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ ABZFEN016010R1XMB page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists ABZFE-N0160-10R-1X/M-B (EPE / Bosch-Rexroth Filtration) as replaced by SP-075-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ R900229778 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists R900229778 (EPE / Bosch-Rexroth Filtration) as replaced by SP-075-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ R928016890 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists R 928016890 (EPE / Bosch-Rexroth Filtration) as replaced by SP-075-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: STAUFF cross reference chart →
How the SP-075-E-10-B model number is decoded
- SP-075-E-10-BSTAUFF replacement element part number per the STAUFF Filter Interchange database.
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the SP-075-E-10-B filter element?
What replaces the SP-075-E-10-B filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Same-envelope elements from other brands
View full interchange →These 5 catalog element(s) share the 70×118 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Replacement Elements series
All 4930 (list page 9/10) →Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.