STAUFF · Replacement Elements · inline line

SP-070-F-10-B filter element: specifications & equivalents

Q: What are the dimensions of the SP-070-F-10-B filter element?

The published envelope is 80 mm OD × 207 mm length with a 43.5 mm inside diameter (3.150 × 8.150 in × 1.713 in ID). Confirm against the housing drawing before ordering.

The SP-070-F-10-B is a STAUFF inline-line hydraulic filter element, sized 80 × 207 mm OD × length (ID 43.5 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 80 × 207 mm

Inside diameter 43.5 mm

Line type inline

Partially verified. Fit and grade trace to an official interchange document; dimensional values are compiled from 0 aftermarket listing(s) and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.

Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.

Specification table

Parameter	Value
Filter type	inline line
Outside diameter OD	80 mm
Inside diameter ID	43.5 mm
Length	207 mm
End caps	open-ended cartridge element
Integral bypass valve	none (housing/valve-dependent)
Source catalog	STAUFF: STAUFF Filter Interchange online database (filterinterchange.com)
Last verified	2026-09-28

Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.

STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	80 mm (3.150 in)
Inside diameter	43.5 mm (1.713 in)
Overall length	207 mm (8.150 in)

All 80×207 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ D141G10B	Filtrec	full	Filtrec's official Cross Navigator maps STAUFF SP070F10B to FILTREC D141G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 76135586 page in verification queue	UFI	partial	STAUFF Filter Interchange lists 76135586 (COMEX / Ecoparts) as replaced by SP-070-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 891017PSVST10 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 891017PSVST10 (MAHLE / Filtration Group) as replaced by SP-070-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 891017PSVST10NBR page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 891017PSVST10NBR (MAHLE / Filtration Group) as replaced by SP-070-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 891017SMXVST10 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 891017SMXVST10 (MAHLE / Filtration Group) as replaced by SP-070-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 891017SMXVST10NBR page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 891017SMXVST10NBR (MAHLE / Filtration Group) as replaced by SP-070-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 8TZX10	Schroeder Industries	partial	Schroeder online cross-reference (STAUFF); envelope match — verify grade and seals.
↔ 8TZX25	Schroeder Industries	partial	Schroeder online cross-reference (STAUFF); envelope match — verify grade and seals.
↔ 9314809 page in verification queue	UFI	partial	STAUFF Filter Interchange lists 9314809 (PUROLATOR) as replaced by SP-070-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 9314810 page in verification queue	UFI	partial	STAUFF Filter Interchange lists 9314810 (PUROLATOR) as replaced by SP-070-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HF30480	Fleetguard	partial	Fleetguard's online catalog lists SP070F10B as an interchange for HF30480. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ MP4004	MP Filtri	partial	STAUFF Filter Interchange lists MP4004 (MP-FILTRI) as replaced by SP-070-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ P9601D08H10 page in verification queue	Donaldson	partial	STAUFF Filter Interchange lists P9601D08H10 (COMEX / Ecoparts) as replaced by SP-070-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ P9601D08H2010 page in verification queue	Donaldson	partial	STAUFF Filter Interchange lists P9601D08H2010 (COMEX / Ecoparts) as replaced by SP-070-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ PL1102A010AHP01 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists PL1102A010AHP01 (MP-FILTRI) as replaced by SP-070-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ R928016985 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists R 928016985 (EPE / Bosch-Rexroth Filtration) as replaced by SP-070-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ SBF-9601-8Z10B	Schroeder Industries	partial	Schroeder online cross-reference (STAUFF); envelope match — verify grade and seals.
↔ STU181 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists STU-181 (NORMAN) as replaced by SP-070-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ US1102A012AHP01 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists US1102A012AHP01 (MP-FILTRI) as replaced by SP-070-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ V6024B2C10 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists V6024B2C10 (VICKERS) as replaced by SP-070-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: STAUFF cross reference chart →

How the SP-070-F-10-B model number is decoded

SP-070-F-10-BSTAUFF replacement element part number per the STAUFF Filter Interchange database.

Typical equipment & applications

Replacement element for OEM hydraulic filter housings

Selection pitfalls — read before you substitute

End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.

Frequently asked questions

What are the dimensions of the SP-070-F-10-B filter element?

The published envelope is 80 mm OD × 207 mm length with a 43.5 mm inside diameter (3.150 × 8.150 in × 1.713 in ID). Confirm against the housing drawing before ordering.

What replaces the SP-070-F-10-B filter element?

1 catalog-confirmed full match(es) (D141G10B); 19 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 15 catalog element(s) share the 80×207 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

Other models in the Replacement Elements series

All 4930 (list page 9/10) →

AD-030-B-125-B 83×193 mm AD-030-B-40-B 83×193 mm AD-030-B-60-B 83×193 mm AD-030-B-80-B 83×193 mm AD-030-E-20-B 83×193 mm AD-033-B-40-B 89×226 mm AD-033-B-60-B 89×226 mm AD-033-B-80-B 89×226 mm AD-033-E-10-B 89×226 mm BL-200-E-10-B 86×62 mm

Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.