STAUFF · Replacement Elements · inline line

SL-022-B-10-B filter element: specifications & equivalents

Q: What are the dimensions of the SL-022-B-10-B filter element?

The published envelope is 51.5 mm OD × 176.5 mm length with a 32.8 mm inside diameter (2.028 × 6.949 in × 1.291 in ID). Confirm against the housing drawing before ordering.

The SL-022-B-10-B is a STAUFF inline-line hydraulic filter element, sized 51.5 × 176.5 mm OD × length (ID 32.8 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 51.5 × 176.5 mm

Inside diameter 32.8 mm

Line type inline

Partially verified. Fit and grade trace to an official interchange document; dimensional values are compiled from 0 aftermarket listing(s) and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.

Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.

Specification table

Parameter	Value
Filter type	inline line
Outside diameter OD	51.5 mm
Inside diameter ID	32.8 mm
Length	176.5 mm
Integral bypass valve	none (housing/valve-dependent)
Source catalog	STAUFF: STAUFF Filter Interchange online database (filterinterchange.com)
Last verified	2026-09-28

Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.

STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	51.5 mm (2.028 in)
Inside diameter	32.8 mm (1.291 in)
Overall length	176.5 mm (6.949 in)

All 52×177 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ DMD127B10B	Filtrec	full	Filtrec's official Cross Navigator maps STAUFF SL022B10B to FILTREC DMD127B10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 1880G10G000M page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 18.80 G10-G00-0-M (EPE / Bosch-Rexroth Filtration) as replaced by SL-022-B-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 1880G10G000P page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 18.80 G10-G00-0-P (EPE / Bosch-Rexroth Filtration) as replaced by SL-022-B-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 9640014112 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 9640014112 (MAHLE / Filtration Group) as replaced by SL-022-B-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: STAUFF cross reference chart →

How the SL-022-B-10-B model number is decoded

SL-022-B-10-BSTAUFF replacement element part number per the STAUFF Filter Interchange database.

Typical equipment & applications

Replacement element for OEM hydraulic filter housings

Frequently asked questions

What are the dimensions of the SL-022-B-10-B filter element?

The published envelope is 51.5 mm OD × 176.5 mm length with a 32.8 mm inside diameter (2.028 × 6.949 in × 1.291 in ID). Confirm against the housing drawing before ordering.

What replaces the SL-022-B-10-B filter element?

1 catalog-confirmed full match(es) (DMD127B10B); 3 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 21 catalog element(s) share the 52×177 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

HD611 MANN-FILTER SL-022-B-100-B STAUFF SL-022-B-25-B STAUFF SL-022-B-40-B STAUFF SL-022-B-60-B STAUFF SL-022-D-10-B STAUFF SL-022-D-20-B STAUFF SL-022-E-03-B STAUFF SL-022-E-10-B STAUFF SL-022-E-20-B STAUFF

Other models in the Replacement Elements series

All 4930 (list page 8/10) →

AD-030-B-125-B 83×193 mm AD-030-B-40-B 83×193 mm AD-030-B-60-B 83×193 mm AD-030-B-80-B 83×193 mm AD-030-E-20-B 83×193 mm AD-033-B-40-B 89×226 mm AD-033-B-60-B 89×226 mm AD-033-B-80-B 89×226 mm AD-033-E-10-B 89×226 mm BL-200-E-10-B 86×62 mm

Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.