STAUFF · Replacement Elements · inline line
SFC-5710-AE filter element: specifications & equivalents
The SFC-5710-AE is a STAUFF inline-line hydraulic filter element, sized 132 × 180 mm OD × length. Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 132 × 180 mm
Line type inline
Partially verified. Fit and grade trace to an official interchange document;
dimensional values are compiled from 0 aftermarket listing(s)
and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.
Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 132 mm |
| Length | 180 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Source catalog | STAUFF: STAUFF Filter Interchange online database (filterinterchange.com) |
| Last verified | 2026-09-27 |
Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.
STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.
Dimensions & series range
| Outside diameter | 132 mm (5.197 in) |
| Overall length | 180 mm (7.087 in) |
All 132×180 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 0160MG010BN page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists 0160MG010BN (HYDAC) as replaced by SFC-5710-AE. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ 182000007 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists 182000007 (FBO) as replaced by SFC-5710-AE. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ 3683541 page in verification queue | UFI | partial | STAUFF Filter Interchange lists 3683541 (MATHIEU YNO) as replaced by SFC-5710-AE. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ 4400184 page in verification queue | UFI | partial | STAUFF Filter Interchange lists 4400184 (MACO MEUDON) as replaced by SFC-5710-AE. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ 8090H10SL000 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists 80.90H10SL000 (EPE / Bosch-Rexroth Filtration) as replaced by SFC-5710-AE. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ ESE21NFC page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists ESE 21NFC (SOFIMA) as replaced by SFC-5710-AE. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ HF7980 page in verification queue | Fleetguard | partial | STAUFF Filter Interchange lists HF 7980 (FLEETGUARD / CUMMINS) as replaced by SFC-5710-AE. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ P176324 page in verification queue | Donaldson | partial | STAUFF Filter Interchange lists P176324 (DONALDSON) as replaced by SFC-5710-AE. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ R928016614 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists R 928016614 (EPE / Bosch-Rexroth Filtration) as replaced by SFC-5710-AE. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ SH70000 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists SH 70000 (HIFI / JURA Filtration) as replaced by SFC-5710-AE. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the SFC-5710-AE model number is decoded
- SFC-5710-AESTAUFF replacement element part number per the STAUFF Filter Interchange database.
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the SFC-5710-AE filter element?
The published envelope is 132 mm OD × 180 mm length (5.197 × 7.087 in). Confirm against the housing drawing before ordering.
What replaces the SFC-5710-AE filter element?
10 partial match(es) requiring parameter review
How do I read the SFC-5710-AE part number?
See the designation decoder above: each segment of SFC5710AE encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Same-envelope elements from other brands
View full interchange →These 7 catalog element(s) share the 132×180 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Replacement Elements series
All 3832 → AD-030-B-125-B AD-030-B-40-B AD-030-B-60-B AD-030-B-80-B AD-030-E-20-B AD-033-B-40-B AD-033-B-60-B AD-033-B-80-B FE-BL-200 FE-BL-500
Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-27. Read our editorial & correction policy.