STAUFF · Replacement Elements · inline line

SE-070-H-20-B filter element: specifications & equivalents

The SE-070-H-20-B is a STAUFF inline-line hydraulic filter element, sized 69 × 175 mm OD × length (ID 34.2 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 69 × 175 mm
Inside diameter 34.2 mm
Line type inline
Partially verified. Fit and grade trace to an official interchange document; dimensional values are compiled from 0 aftermarket listing(s) and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.

Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.

Specification table

ParameterValue
Filter type inline line
Outside diameter OD 69 mm
Inside diameter ID 34.2 mm
Length 175 mm
End caps open-ended cartridge element
Integral bypass valve none (housing/valve-dependent)
Source catalog STAUFF: STAUFF Filter Interchange online database (filterinterchange.com)
Last verified2026-09-28

Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.

STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.

Dimensional drawing

SE-070-H-20-B — FILTER ELEMENTSTAUFF · Replacement Elements · inline line · dimensional reference drawingFRONT VIEWTOP VIEW175 mmØ69 mmØ69Ø34.2 boreTECHNICAL DATAElement typeinline lineOutside dia. OD69 mmInside dia. ID34.2 mmLength175 mmEnd capsopen-ended cartridge elementSTAUFF — STAUFF Filter Interchange online database (filterinterchange.com), accessed2026-09-27NOTES1. Dimensions in millimetres, nominal values as cited in the source line above; manufacturing tolerances and interface details per the manufacturer data sheet.2. Schematic section derived from catalog data — not a manufacturer drawing. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.3. ElementRef is an independent reference database; not affiliated with, authorised or endorsed by STAUFF.ELEMENTREF · SE-070-H-20-BDWG NO.ER-SE-070-H-20-B-DWG-01DATA DATE2026-09-28SCALE1:1REV.A
Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter69 mm (2.717 in)
Inside diameter34.2 mm (1.346 in)
Overall length175 mm (6.890 in)

All 69×175 mm interchange elements →

Cross references & equivalents

Equivalent modelBrandMatch levelNote
↔ DHD240H20BFiltrecfullFiltrec's official Cross Navigator maps STAUFF SE070H20B to FILTREC DHD240H20B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 77889553
page in verification queue
UFIpartialSTAUFF Filter Interchange lists 77889553 (COMEX / Ecoparts) as replaced by SE-070-H-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ DP099A020AHP01
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists DP099A020AHP01 (MP-FILTRI) as replaced by SE-070-H-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ FFKPVL17252A25ABS
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists FFKPVL17252A25ABS (FINNFILTER) as replaced by SE-070-H-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ G03154
page in verification queue
ParkerpartialSTAUFF Filter Interchange lists G03154 (PARKER) as replaced by SE-070-H-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ H0240DH2016
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists H0240DH2016 (COMEX / Ecoparts) as replaced by SE-070-H-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HC2217FCT6HPallpartialSTAUFF Filter Interchange lists HC 2217 FCT 6H (PALL) as replaced by SE-070-H-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HC2217FDT6H
page in verification queue
PallpartialSTAUFF Filter Interchange lists HC2217FDT6H (PALL) as replaced by SE-070-H-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HC2217FHT6H
page in verification queue
PallpartialSTAUFF Filter Interchange lists HC 2217 FHT 6H (PALL) as replaced by SE-070-H-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HC2217FKT6H
page in verification queue
PallpartialSTAUFF Filter Interchange lists HC 2217 FKT 6H (PALL) as replaced by SE-070-H-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HC2217FRT6H
page in verification queue
PallpartialSTAUFF Filter Interchange lists HC 2217 FRT 6H (PALL) as replaced by SE-070-H-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HC2217FUT6H
page in verification queue
PallpartialSTAUFF Filter Interchange lists HC 2217 FUT 6H (PALL) as replaced by SE-070-H-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HY13079
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists HY 13079 (SF-FILTER) as replaced by SE-070-H-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ MP9503MP FiltripartialSTAUFF Filter Interchange lists MP9503 (MP-FILTRI) as replaced by SE-070-H-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ SBF-0241D-Z25BSchroeder IndustriespartialSchroeder online cross-reference (STAUFF); envelope match — verify grade and seals.
↔ ST1049
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists ST1049 (ST-FILTER) as replaced by SE-070-H-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: STAUFF cross reference chart →

How the SE-070-H-20-B model number is decoded

  • SE-070-H-20-BSTAUFF replacement element part number per the STAUFF Filter Interchange database.

Typical equipment & applications

  • Replacement element for OEM hydraulic filter housings

Selection pitfalls — read before you substitute

  • End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.

Frequently asked questions

What are the dimensions of the SE-070-H-20-B filter element?
The published envelope is 69 mm OD × 175 mm length with a 34.2 mm inside diameter (2.717 × 6.890 in × 1.346 in ID). Confirm against the housing drawing before ordering.
What replaces the SE-070-H-20-B filter element?
1 catalog-confirmed full match(es) (DHD240H20B); 15 partial match(es) requiring parameter review
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 57 catalog element(s) share the 69×175 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

Other models in the Replacement Elements series

All 4930 (list page 7/10) →

Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.