STAUFF · Replacement Elements · inline line
SE-070-A-05-B filter element: specifications & equivalents
The SE-070-A-05-B is a STAUFF inline-line hydraulic filter element, sized 60 × 189 mm OD × length (ID 34.2 mm). Verify against the current manufacturer data sheet before ordering.
Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 60 mm |
| Inside diameter ID | 34.2 mm |
| Length | 189 mm |
| End caps | open-ended cartridge element |
| Integral bypass valve | none (housing/valve-dependent) |
| Source catalog | STAUFF: STAUFF Filter Interchange online database (filterinterchange.com) |
| Last verified | 2026-09-28 |
Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.
STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 60 mm (2.362 in) |
| Inside diameter | 34.2 mm (1.346 in) |
| Overall length | 189 mm (7.441 in) |
All 60×189 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ DHD240A05B | Filtrec | full | Filtrec's official Cross Navigator maps STAUFF SE070A05B to FILTREC DHD240A05B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ 00303872 page in verification queue | UFI | partial | STAUFF Filter Interchange lists 00303872 (HYDAC) as replaced by SE-070-A-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ 1265450 page in verification queue | UFI | partial | STAUFF Filter Interchange lists 1265450 (HYDAC) as replaced by SE-070-A-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ 303872 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists 303872 (HYDAC) as replaced by SE-070-A-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ 9240M5B000P page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists 9. 240 M5-B00-0-P (EPE / Bosch-Rexroth Filtration) as replaced by SE-070-A-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ G03127 page in verification queue | Parker | partial | STAUFF Filter Interchange lists G03127 (PARKER) as replaced by SE-070-A-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ ST1083 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists ST1083 (ST-FILTER) as replaced by SE-070-A-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: STAUFF cross reference chart →
How the SE-070-A-05-B model number is decoded
- SE-070-A-05-BSTAUFF replacement element part number per the STAUFF Filter Interchange database.
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the SE-070-A-05-B filter element?
What replaces the SE-070-A-05-B filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Same-envelope elements from other brands
View full interchange →These 18 catalog element(s) share the 60×189 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Replacement Elements series
All 4930 (list page 7/10) →Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.