STAUFF · Replacement Elements · inline line

SE-014-H-05-B filter element: specifications & equivalents

The SE-014-H-05-B is a STAUFF inline-line hydraulic filter element, sized 47 × 84 mm OD × length (ID 22.2 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 47 × 84 mm
Inside diameter 22.2 mm
Line type inline
Partially verified. Fit and grade trace to an official interchange document; dimensional values are compiled from 0 aftermarket listing(s) and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.

Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.

Specification table

ParameterValue
Filter type inline line
Outside diameter OD 47 mm
Inside diameter ID 22.2 mm
Length 84 mm
End caps open-ended cartridge element
Integral bypass valve none (housing/valve-dependent)
Source catalog STAUFF: STAUFF Filter Interchange online database (filterinterchange.com)
Last verified2026-09-28

Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.

STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.

Dimensional drawing

SE-014-H-05-B — FILTER ELEMENTSTAUFF · Replacement Elements · inline line · dimensional reference drawingFRONT VIEWTOP VIEW84 mmØ47 mmØ47Ø22.2 boreTECHNICAL DATAElement typeinline lineOutside dia. OD47 mmInside dia. ID22.2 mmLength84 mmEnd capsopen-ended cartridge elementSTAUFF — STAUFF Filter Interchange online database (filterinterchange.com), accessed2026-09-27NOTES1. Dimensions in millimetres, nominal values as cited in the source line above; manufacturing tolerances and interface details per the manufacturer data sheet.2. Schematic section derived from catalog data — not a manufacturer drawing. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.3. ElementRef is an independent reference database; not affiliated with, authorised or endorsed by STAUFF.ELEMENTREF · SE-014-H-05-BDWG NO.ER-SE-014-H-05-B-DWG-01DATA DATE2026-09-28SCALE1.7:1REV.A
Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter47 mm (1.850 in)
Inside diameter22.2 mm (0.874 in)
Overall length84 mm (3.307 in)

All 47×84 mm interchange elements →

Cross references & equivalents

Equivalent modelBrandMatch levelNote
↔ DHD60H05BFiltrecfullFiltrec's official Cross Navigator maps STAUFF SE014H05B to FILTREC DHD60H05B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 58151
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists 581.51 (FBO) as replaced by SE-014-H-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 77889298
page in verification queue
UFIpartialSTAUFF Filter Interchange lists 77889298 (COMEX / Ecoparts) as replaced by SE-014-H-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 890002PSVST6
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists 890002 PS VST 6 (MAHLE / Filtration Group) as replaced by SE-014-H-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 890019PSVST6
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists 890019 PS VST 6 (MAHLE / Filtration Group) as replaced by SE-014-H-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ DP040A005AHP01
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists DP040A005AHP01 (MP-FILTRI) as replaced by SE-014-H-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ FFKPVL17201A5
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists FFKPVL17201A5 (FINNFILTER) as replaced by SE-014-H-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ FFKPVL17201A5ABS
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists FFKPVL17201A5ABS (FINNFILTER) as replaced by SE-014-H-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ G03065
page in verification queue
ParkerpartialSTAUFF Filter Interchange lists G03065 (PARKER) as replaced by SE-014-H-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HP06DHL46MB
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists HP06DHL4-6MB (HY-PRO) as replaced by SE-014-H-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HP06DHL46MSB
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists HP06DHL4-6MSB (HY-PRO) as replaced by SE-014-H-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HY13016
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists HY 13016 (SF-FILTER) as replaced by SE-014-H-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ MP9201MP FiltripartialSTAUFF Filter Interchange lists MP9201 (MP-FILTRI) as replaced by SE-014-H-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ SBF-0061D-Z5BSchroeder IndustriespartialSchroeder online cross-reference (STAUFF); envelope match — verify grade and seals.
↔ ST1035
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists ST1035 (ST-FILTER) as replaced by SE-014-H-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ WGHH60005DH
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists WGHH 60005DH (WOODGATE) as replaced by SE-014-H-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: STAUFF cross reference chart →

How the SE-014-H-05-B model number is decoded

  • SE-014-H-05-BSTAUFF replacement element part number per the STAUFF Filter Interchange database.

Typical equipment & applications

  • Replacement element for OEM hydraulic filter housings

Selection pitfalls — read before you substitute

  • End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.

Frequently asked questions

What are the dimensions of the SE-014-H-05-B filter element?
The published envelope is 47 mm OD × 84 mm length with a 22.2 mm inside diameter (1.850 × 3.307 in × 0.874 in ID). Confirm against the housing drawing before ordering.
What replaces the SE-014-H-05-B filter element?
1 catalog-confirmed full match(es) (DHD60H05B); 15 partial match(es) requiring parameter review
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 75 catalog element(s) share the 47×84 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

Other models in the Replacement Elements series

All 4930 (list page 7/10) →

Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.