STAUFF · Replacement Elements · inline line

SE-014-A-10B filter element: specifications & equivalents

Q: What are the dimensions of the SE-014-A-10B filter element?

The published envelope is 44.5 mm OD × 91 mm length with a 22.2 mm inside diameter (1.752 × 3.583 in × 0.874 in ID). Confirm against the housing drawing before ordering.

The SE-014-A-10B is a STAUFF inline-line hydraulic filter element, sized 44.5 × 91 mm OD × length (ID 22.2 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 44.5 × 91 mm

Inside diameter 22.2 mm

Line type inline

Partially verified. Fit and grade trace to an official interchange document; dimensional values are compiled from 0 aftermarket listing(s) and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.

Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.

Specification table

Parameter	Value
Filter type	inline line
Outside diameter OD	44.5 mm
Inside diameter ID	22.2 mm
Length	91 mm
End caps	open-ended cartridge element
Integral bypass valve	none (housing/valve-dependent)
Source catalog	STAUFF: STAUFF Filter Interchange online database (filterinterchange.com)
Last verified	2026-09-28

Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.

STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	44.5 mm (1.752 in)
Inside diameter	22.2 mm (0.874 in)
Overall length	91 mm (3.583 in)

All 45×91 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ DHD60A10B	Filtrec	full	Filtrec's official Cross Navigator maps STAUFF SE014A10B to FILTREC DHD60A10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 311913 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 311913 (HYDAC) as replaced by SE-014-A-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 70517611 page in verification queue	UFI	partial	STAUFF Filter Interchange lists 70517611 (COMEX / Ecoparts) as replaced by SE-014-A-10B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 960G10B000P page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 9.60G10B000P (EPE / Bosch-Rexroth Filtration) as replaced by SE-014-A-10B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ G03041 page in verification queue	Parker	partial	STAUFF Filter Interchange lists G03041 (PARKER) as replaced by SE-014-A-10B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HP06DHL410SFSB page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists HP06DHL410SFSB (HY-PRO) as replaced by SE-014-A-10B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HP06SHL412SFSV page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists HP06SHL4-12SFSV (HY-PRO) as replaced by SE-014-A-10B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HY13030 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists HY 13030 (SF-FILTER) as replaced by SE-014-A-10B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ ST1070 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists ST1070 (ST-FILTER) as replaced by SE-014-A-10B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ STU609 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists STU-609 (NORMAN) as replaced by SE-014-A-10B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ WGHH60010DV page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists WGHH 60010DV (WOODGATE) as replaced by SE-014-A-10B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: STAUFF cross reference chart →

How the SE-014-A-10B model number is decoded

SE-014-A-10BSTAUFF replacement element part number per the STAUFF Filter Interchange database.

Typical equipment & applications

Replacement element for OEM hydraulic filter housings

Selection pitfalls — read before you substitute

End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.

Frequently asked questions

What are the dimensions of the SE-014-A-10B filter element?

The published envelope is 44.5 mm OD × 91 mm length with a 22.2 mm inside diameter (1.752 × 3.583 in × 0.874 in ID). Confirm against the housing drawing before ordering.

What replaces the SE-014-A-10B filter element?

1 catalog-confirmed full match(es) (DHD60A10B); 10 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 35 catalog element(s) share the 45×91 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

DHD60A03B Filtrec DHD60A05B Filtrec DHD60A10B Filtrec DHD60A10V Filtrec DHD60A20B Filtrec DHD60B100B Filtrec · 100 µm DHD60B100V Filtrec · 100 µm DHD60B10B Filtrec · 10 µm DHD60B25B Filtrec · 25 µm DHD60B25V Filtrec · 25 µm

Other models in the Replacement Elements series

All 4930 (list page 7/10) →

AD-030-B-125-B 83×193 mm AD-030-B-40-B 83×193 mm AD-030-B-60-B 83×193 mm AD-030-B-80-B 83×193 mm AD-030-E-20-B 83×193 mm AD-033-B-40-B 89×226 mm AD-033-B-60-B 89×226 mm AD-033-B-80-B 89×226 mm AD-033-E-10-B 89×226 mm BL-200-E-10-B 86×62 mm

Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.