STAUFF · Replacement Elements · inline line

SA-080-E-10-B filter element: specifications & equivalents

The SA-080-E-10-B is a STAUFF inline-line hydraulic filter element, sized 94 × 201 mm OD × length (ID 48 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 94 × 201 mm
Inside diameter 48 mm
Line type inline
Partially verified. Fit and grade trace to an official interchange document; dimensional values are compiled from 0 aftermarket listing(s) and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.

Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.

Specification table

ParameterValue
Filter type inline line
Outside diameter OD 94 mm
Inside diameter ID 48 mm
Length 201 mm
Integral bypass valve none (housing/valve-dependent)
Source catalog STAUFF: STAUFF Filter Interchange online database (filterinterchange.com)
Last verified2026-09-28

Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.

STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.

Dimensional drawing

SA-080-E-10-B — FILTER ELEMENTSTAUFF · Replacement Elements · inline line · dimensional reference drawingFRONT VIEWTOP VIEW201 mmØ94 mmØ94Ø48 boreTECHNICAL DATAElement typeinline lineOutside dia. OD94 mmInside dia. ID48 mmLength201 mmSTAUFF — STAUFF Filter Interchange online database (filterinterchange.com), accessed2026-09-27NOTES1. Dimensions in millimetres, nominal values as cited in the source line above; manufacturing tolerances and interface details per the manufacturer data sheet.2. Schematic section derived from catalog data — not a manufacturer drawing. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.3. ElementRef is an independent reference database; not affiliated with, authorised or endorsed by STAUFF.ELEMENTREF · SA-080-E-10-BDWG NO.ER-SA-080-E-10-B-DWG-01DATA DATE2026-09-28SCALE1:1.2REV.A
Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter94 mm (3.701 in)
Inside diameter48 mm (1.890 in)
Overall length201 mm (7.913 in)

All 94×201 mm interchange elements →

Cross references & equivalents

Equivalent modelBrandMatch levelNote
↔ 055380
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists 055380 (MOXY) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 2700073
page in verification queue
UFIpartialSTAUFF Filter Interchange lists 2700073 (HYMAC) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 3281038
page in verification queue
UFIpartialSTAUFF Filter Interchange lists 3281038 (HYDROMAC) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 370Z221A
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists 370Z221A (FAIREY ARLON) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 3F37GGEB08
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists 3F37GGEB08 (ST) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 3F37GGHB08
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists 3F37GGHB08 (ST) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 52272929
page in verification queue
UFIpartialSTAUFF Filter Interchange lists 52272929 (INGERSOLL RAND) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 7011A
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists 7011A (CROSLAND) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 7012A
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists 7012A (CROSLAND) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 9231100078
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists 9231100078 (KALMAR) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ ABP3001585
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists ABP3001585 (AVELING BARFORD) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ AP40502
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists AP40502 (FBO) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ AZH016
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists AZH 016 (COOPERS) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ D931G06AFiltrecpartialSTAUFF Filter Interchange lists D931G06A (FILTREC) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ D931G10AFiltrecpartialSTAUFF Filter Interchange lists D931G10A (FILTREC) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ D931G25AFiltrecpartialSTAUFF Filter Interchange lists D931G25A (FILTREC) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ F004287
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists F004287 (TIMBERJACK) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ F370A062
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists F370A062 (ST) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ F370A122
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists F370A122 (ST) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ F370A252
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists F370A252 (ST) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ FFKPVL15011B25
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists FFKPVL15011B25 (FINNFILTER) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ LHX93322
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists LHX93322 (LUBER-FINER) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ P779580
page in verification queue
DonaldsonpartialSTAUFF Filter Interchange lists P 77-9580 (DONALDSON) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ V0372B2C10
page in verification queue
AftermarketpartialSTAUFF Filter Interchange lists V0372B2C10 (VICKERS) as replaced by SA-080-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: STAUFF cross reference chart →

How the SA-080-E-10-B model number is decoded

  • SA-080-E-10-BSTAUFF replacement element part number per the STAUFF Filter Interchange database.

Typical equipment & applications

  • Replacement element for OEM hydraulic filter housings

Frequently asked questions

What are the dimensions of the SA-080-E-10-B filter element?
The published envelope is 94 mm OD × 201 mm length with a 48 mm inside diameter (3.701 × 7.913 in × 1.890 in ID). Confirm against the housing drawing before ordering.
What replaces the SA-080-E-10-B filter element?
24 partial match(es) requiring parameter review
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 8 catalog element(s) share the 94×201 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

Other models in the Replacement Elements series

All 4930 (list page 6/10) →

Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.