STAUFF · Replacement Elements · inline line

RS-035-B-25-B filter element: specifications & equivalents

Q: What are the dimensions of the RS-035-B-25-B filter element?

The published envelope is 74 mm OD × 148 mm length with a 45.9 mm inside diameter (2.913 × 5.827 in × 1.807 in ID). Confirm against the housing drawing before ordering.

The RS-035-B-25-B is a STAUFF inline-line hydraulic filter element, sized 74 × 148 mm OD × length (ID 45.9 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 74 × 148 mm

Inside diameter 45.9 mm

Line type inline

Partially verified. Fit and grade trace to an official interchange document; dimensional values are compiled from 0 aftermarket listing(s) and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.

Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.

Specification table

Parameter	Value
Filter type	inline line
Outside diameter OD	74 mm
Inside diameter ID	45.9 mm
Length	148 mm
Integral bypass valve	none (housing/valve-dependent)
Source catalog	STAUFF: STAUFF Filter Interchange online database (filterinterchange.com)
Last verified	2026-09-28

Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.

STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	74 mm (2.913 in)
Inside diameter	45.9 mm (1.807 in)
Overall length	148 mm (5.827 in)

All 74×148 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ RVR1140B25B	Filtrec	full	Filtrec's official Cross Navigator maps STAUFF RS035B25B to FILTREC RVR1140B25B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 1140G25A0000 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 1. 140G 25-A 00-0-0 (EPE / Bosch-Rexroth Filtration) as replaced by RS-035-B-25-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 1140G25A000P page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 1.140G25-A00-0-P (EPE / Bosch-Rexroth Filtration) as replaced by RS-035-B-25-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HY11071 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists HY 11071 (SF-FILTER) as replaced by RS-035-B-25-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ SH67004 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists SH 67004 (HIFI / JURA Filtration) as replaced by RS-035-B-25-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ ST1776 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists ST1776 (ST-FILTER) as replaced by RS-035-B-25-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: STAUFF cross reference chart →

How the RS-035-B-25-B model number is decoded

RS-035-B-25-BSTAUFF replacement element part number per the STAUFF Filter Interchange database.

Typical equipment & applications

Replacement element for OEM hydraulic filter housings

Frequently asked questions

What are the dimensions of the RS-035-B-25-B filter element?

The published envelope is 74 mm OD × 148 mm length with a 45.9 mm inside diameter (2.913 × 5.827 in × 1.807 in ID). Confirm against the housing drawing before ordering.

What replaces the RS-035-B-25-B filter element?

1 catalog-confirmed full match(es) (RVR1140B25B); 5 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 28 catalog element(s) share the 74×148 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

RVR1140A05B Filtrec RVR1140A10B Filtrec RVR1140A10B/2 Filtrec RVR1140B100B Filtrec · 100 µm RVR1140B10B Filtrec · 10 µm RVR1140B25B Filtrec · 25 µm RVR1140B40B Filtrec · 40 µm RVR1140B60B Filtrec · 60 µm RVR1140E03B Filtrec · 5 µm RVR1140E10B Filtrec · 12 µm

Other models in the Replacement Elements series

All 4930 (list page 6/10) →

AD-030-B-125-B 83×193 mm AD-030-B-40-B 83×193 mm AD-030-B-60-B 83×193 mm AD-030-B-80-B 83×193 mm AD-030-E-20-B 83×193 mm AD-033-B-40-B 89×226 mm AD-033-B-60-B 89×226 mm AD-033-B-80-B 89×226 mm AD-033-E-10-B 89×226 mm BL-200-E-10-B 86×62 mm

Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.