STAUFF · Replacement Elements · inline line

RP-240-E-20-B filter element: specifications & equivalents

Q: What are the dimensions of the RP-240-E-20-B filter element?

The published envelope is 152 mm OD × 649 mm length with a 82.3 mm inside diameter (5.984 × 25.551 in × 3.240 in ID). Confirm against the housing drawing before ordering.

The RP-240-E-20-B is a STAUFF inline-line hydraulic filter element, sized 152 × 649 mm OD × length (ID 82.3 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 152 × 649 mm

Inside diameter 82.3 mm

Line type inline

Partially verified. Fit and grade trace to an official interchange document; dimensional values are compiled from 0 aftermarket listing(s) and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.

Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.

Specification table

Parameter	Value
Filter type	inline line
Outside diameter OD	152 mm
Inside diameter ID	82.3 mm
Length	649 mm
Integral bypass valve	none (housing/valve-dependent)
Source catalog	STAUFF: STAUFF Filter Interchange online database (filterinterchange.com)
Last verified	2026-09-28

Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.

STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	152 mm (5.984 in)
Inside diameter	82.3 mm (3.240 in)
Overall length	649 mm (25.551 in)

All 152×649 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ R444G25	Filtrec	full	Filtrec's official Cross Navigator maps STAUFF RP240E20B to FILTREC R444G25 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 01269065 page in verification queue	UFI	partial	STAUFF Filter Interchange lists 01269065 (HYDAC) as replaced by RP-240-E-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 05.8400.25VG.10.B.P.26	Eaton / Internormen	partial	STAUFF Filter Interchange lists 05.8400.25VG.10.B.P.26 (INTERNORMEN) as replaced by RP-240-E-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 168400VH20SLS000P page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 16.8400VH20SLS000P (EPE / Bosch-Rexroth Filtration) as replaced by RP-240-E-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 168400VH20XLS000P page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 16.8400 / V H20XL-S00-0-P (EPE / Bosch-Rexroth Filtration) as replaced by RP-240-E-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 933229Q	Parker	partial	STAUFF Filter Interchange lists 933229Q (PARKER) as replaced by RP-240-E-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ FC1363F025BS page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists FC1363F025BS (FINNFILTER) as replaced by RP-240-E-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ HF30815	Fleetguard	partial	Fleetguard's online catalog lists RP240E20B as an interchange for HF30815. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ HP84L2625MB page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists HP84L2625MB (HY-PRO) as replaced by RP-240-E-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ R928016758 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists R 928016758 (EPE / Bosch-Rexroth Filtration) as replaced by RP-240-E-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ RC083809 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists RC083809 (NUOVO PIGNONE) as replaced by RP-240-E-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ SBF-8400-26Z25B	Schroeder Industries	partial	Schroeder online cross-reference (STAUFF); envelope match — verify grade and seals.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: STAUFF cross reference chart →

How the RP-240-E-20-B model number is decoded

RP-240-E-20-BSTAUFF replacement element part number per the STAUFF Filter Interchange database.

Typical equipment & applications

Replacement element for OEM hydraulic filter housings

Frequently asked questions

What are the dimensions of the RP-240-E-20-B filter element?

The published envelope is 152 mm OD × 649 mm length with a 82.3 mm inside diameter (5.984 × 25.551 in × 3.240 in ID). Confirm against the housing drawing before ordering.

What replaces the RP-240-E-20-B filter element?

1 catalog-confirmed full match(es) (R444G25); 11 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 31 catalog element(s) share the 152×649 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

R433C10 Filtrec · 10 µm R433G03V Filtrec · 5 µm R433G03V/ESD Filtrec · 5 µm R433G10 Filtrec · 12 µm R433G10V Filtrec · 12 µm R433G10V/ESD Filtrec · 12 µm R433G25 Filtrec · 22 µm R433G25V Filtrec · 22 µm R433G25V/ESD Filtrec · 22 µm R444G01V/ESD Filtrec · 4 µm

Other models in the Replacement Elements series

All 4930 (list page 6/10) →

AD-030-B-125-B 83×193 mm AD-030-B-40-B 83×193 mm AD-030-B-60-B 83×193 mm AD-030-B-80-B 83×193 mm AD-030-E-20-B 83×193 mm AD-033-B-40-B 89×226 mm AD-033-B-60-B 89×226 mm AD-033-B-80-B 89×226 mm AD-033-E-10-B 89×226 mm BL-200-E-10-B 86×62 mm

Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.